|
I just bought an LSI SAS 9211-8i HBA(Host bus adapter) to use with my new hardware. I realized after looking at the card that it required an x8 slot and my new mobo only x16 available. I keep on reading that PCI-E specs are backwards compatable however...
Started by iLya Lozovyy on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at serverfault):
If there are fewer PCI-E lanes available than the card requires, it should run a little slower....
Yes, in the general case you can install PCI-E cards in any PCI-E slot that will physically accept the card.
Upgrade.
|
|
Hello guys,
I got a mini pci-e wireless card (intel 3945 wireless), and want to install it into my desktop PC (dell OptiPlex 390 i5-2400 / Debian testing) through a mini pci-e to pci-e 1x card.
But Linux can not drive it. Command "lspci" can not list ...
Started by bocaiwen on
, 4 posts
by 2 people.
Answer Snippets (Read the full thread at linuxquestions):
Can you see the wireless card or the adapter through... .
I've never used one of those before, but I've heard less than spectacular things about them .
Your problem probably lies somewhere in between no drivers for the adapter card, and the adapter card itself .
|
|
Here's my question in pictures:
Will something like this:
fit into this? (the x16 slot)
In an argument with my friend about it - want to make sure I'm not crazy. (I'm saying no)
Started by ComputerBox34 on
, 20 posts
by 7 people.
Answer Snippets (Read the full thread at hardforum):
It depends on the board - and on some that the primary x16 slot... .
And only have one pci-e slot? That situation is rare.
Using integated gfx.
|
Ask your Facebook Friends
|
Hello,
I am going to buy a mainboard with pci-e slots v.2.0 and would like to
use a videocard with pci-e v.2.1 with it. Will that work?
Massimo
Started by rb on
, 4 posts
by 1 people.
Answer Snippets (Read the full thread at howtofixcomputers):
So, if you have the videocard in hand, its rated power is over... .
A mainboard with pci-e slots v.2.0 and would like to
> use a videocard with pci-e v.2.1 to 150 W power from a PCI-E slot, up from 75 W in 2.0.
|
|
Hello,
I am going to buy a mainboard with pci-e slots v.2.0 and would like to
use a videocard with pci-e v.2.1 with it. Will that work?
Massimo
Answer Snippets (Read the full thread at pcreview):
So, if you have the videocard in hand, its rated power is over 75... .
Will that work from a PCI-E slot, up from 75 W in 2.0.
With pci-e slots v.2.0 and would like to
> use a videocard with pci-e v.2.1 with it.
|
|
Hello,
I am going to buy a mainboard with pci-e slots v.2.0 and would like to
use a videocard with pci-e v.2.1 with it. Will that work?
Massimo
Answer Snippets (Read the full thread at wirelessforums):
So, if you have the videocard in hand, its rated power is over... .
A mainboard with pci-e slots v.2.0 and would like to
> use a videocard with pci-e v.2.1 to 150 W power from a PCI-E slot, up from 75 W in 2.0.
|
|
I have motherboard pci-e x16 and wana buy vidoe card with pci-e 2.0 x16? Hello i have motherboard pci-e x16 and wana buy vidoe card with pci-e 2.0 x16 its ok ? or i will waste money
Started by Laurynas on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at yahoo):
It would better if you would mention the brand and model number of your motherboard. .
Pcie x16 2.0 will work in a mobo with pcie x16 1.0 but the graphiccard will be bottelnecked .
Yes a graphiccard with.
If ur mobo is not to old it should also be 2.0 .
|
|
Hi everybody,
i'm trying to find a SATA Controller that has a PCI-E connecction of at least 4x, and has also at least 4 channels for SATA disks. I need it to make a real raid 5 system, the fakeraid on my motherboard is absolutely crap.
Started by Stefano on
, 8 posts
by 8 people.
Answer Snippets (Read the full thread at superuser):
My particular model.
Hooks up via PCI-e 4x, and provides real hardware RAID5 and RAID6.
PCI-E x4 8 SATA ports
Are you looking 9650 .
Up there with good support and market penetration.
|
|
Is there much difference between PCI-E X16 1.1 and PCI-E X16 2.0? I have a Sapphire HD 6850 on my ASrock N68C-S UCC which only has a PCI-E X16 1.1 slot.
If I was to get a motherboard with PCI-E X16 2.0 would I see much difference in performance and FPS...
Started by Ben on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at yahoo):
If you were to get a better board you would see a difference as unlike 3.0 and 2.1 where there... .
There isn't t much difference but i wouldn't recommend running it at 1.1 .
2.0 is MUCH MUCH faster in every way, shape, and form .
Yes there is a big difference.
|
|
I'm looking to buy a rackmount server that will accommodate an NVIDIA Tesla C1060 for testing purposes by our developers. The card is a dual-width PCI-e 16x card, and I'm having trouble finding a rackmount server that will fit it. Is anyone aware of a...
Started by Kamil Kisiel on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at serverfault):
|
