|
Friday, May 01, 2009 - 50 Posts by 17 People
Hey guys picked up this 05 yz450 that was "street legal" the wiring was pretty terrible only
motostrano order dosent come in till monday isnt that always the way.
well heres the start of the rewire
maybe even a weather pak connector for the wiring! its kinda nice to have a tig welder at the house
|
|
Wednesday, July 05, 2006 - 40 Posts by 19 People
The new 240V circuit breaker box in the basement, and 10ish gage wires feed the ancient (built
circuits, and they just do basement and kitchen.
The old glass fusebox has a black and red incoming power
. I finished wiring a house built in the late 1800s last year in Lexington,Mass, what a nightmare
|
|
Tuesday, July 28, 2009 - 16 Posts by 11 People
On and
rewiring the whole house.
The rationale for doing this was that we are now 55 years old...
about
the whole-house rewire, I've been retired from work on ill-health grounds
and where I used
. Houses wired 40 years ago were designed with far fewer
sockets since there were not the modern...
|
|
Wednesday, February 20, 2008 - 40 Posts by 19 People
The wiring, and everything looks good. I did not do this to the switches, but again I dont know how
and find everything is still hot and all are wired properly. All lights work via the switches
ceiling light. A well built house with ghetto wiring.
Our 12 year old decided he wanted more...
|
|
Tuesday, October 13, 2009 - 14 Posts by 5 People
Saturday afternoon. Everything was nasty, as most 40 year old cars are, so I cleaned everything
and 'jiggled' the wiring harness and the lights came on. We drove to the store, no issues. When we came
of the car )is faulty. There are a lot of connections going to it, but the wiring for the horn relay
|
|
Friday, October 02, 2009 - 15 Posts by 6 People
Pipe, near closed up with mineral deposits) and the aluminum wiring. I am going to rewire
the whole house.
BIL the electrician thinks I should remove all the aluminum and pull in the romex
the old alum. in there. But I have to abide by local wiring code to get my new meter. While I can
|
|
Thursday, September 10, 2009 - 32 Posts by 14 People
wiring methods. Basement
ceiling is exposed and where the majority of the house wiring is. Lots
with a house built in the '20s, originally knob and tube
wired but (partly) converted to more modren
be to
rip out the existing wiring in the walls of the house and replace it.
I can tell you
|
|
Thursday, October 08, 2009 - 25 Posts by 6 People
And unaltered K&T wiring is not
an inherent fire hazard". Why does your own source disagree with you
that have K&T wiring and have been
insulated. The "Illinois report" looked and couldn't find such data
about the safety of K&T
wiring. Why couldn't the report find significant numbers of house with
K&T
|
|
Monday, August 01, 2005 - 16 Posts by 7 People
My house was built in 1932 and although it has been rewired a few times, the last about 10 years ago...
, the wire leading to the mains in the street and presumably the cables in the street are original
should have been fitted but this did not get done.
A few years ago, the house wiring came under attack...
|
|
Monday, February 23, 2009 - 20 Posts by 13 People
Son's 100+ year old house, and someone put in a gas
furnace. It works fine.
I am helping him install...
electrician wired the house, and made
the black wires hot. There appears to be some evidence
;boobooililililil@roadrunner.com
Old house wiring is scary. Most have a single circuit for every room...
|
)