|
I am the pump killer. I have four bilge pumps on my boat and have managed to kill all four on one passage. So I was thinking about what to do, besides carrying several spares. I had an ephiny! Why not plumb a Y valve into my raw water line? I could do...
Started by Ironhorse74 on
, 13 posts
by 11 people.
Answer Snippets (Read the full thread at cruisersforum):
The liferaft checked Emergency Pumping
Using Your Engine as a Bilge Pump
bilge pump dilemma
Above 3 from custom google search found on the search button on CF
emergency bilge pump - Google Search Quote....
|
|
Bilge pump in zodiac? Hey guys,
I'm rather new to the zodiac/boating world, and I have a 11 foot Avon, with 6hp Johnson. My question is about about automatic bilge pumps. When I take my zodi out on the ocean, I usually get alot of spray into the boat ...
Started by D44boy on
, 11 posts
by 7 people.
Answer Snippets (Read the full thread at iboats):
I also periodically use the one-way drain battery on board, running cable, placing a bilge pump and get hoses to transfer it over the side seems where the manual....
Re: bilge pump in zodiac? I use a hand held pump myself.
|
|
I was installing a 2000gph Rule pump in my bilge today. The wire gauge is different from the float switch to the pump wires, from the pump wires to the 3 position switch, should this be a concern to me?
Started by cburger on
, 15 posts
by 6 people.
Answer Snippets (Read the full thread at cruisersforum):
The wire gauge is different go wrong.
|
Ask your Facebook Friends
|
I noticed guys using a very cool looking bilge type pump for pumping water from a bucket outside the boat to the engine for warming up purposes at the world finals races this year. I would like to know what kind of pump that is and where to buy one. thanks...
Started by badbug3 on
, 11 posts
by 10 people.
Answer Snippets (Read the full thread at performanceboats):
In addition to what ego said up to 180-200* all the... .
BadBug, I bought the largest bilge pump that they had on the shelf at Walmart lol, run a clear hose a 1500 gph bilge pump i use, but an 1100 gph rule would work just fine.
|
|
Sea Ray helm bilge pump switch on or off docked? We purchased a Sea Ray 270SE Sundancer in May of this year. Coming in from fishing last night ( caught a nice 6lb silver ) I did all the usual things drive up, canvas on then turned batteries off I always...
Started by Bob & Sue on
, 11 posts
by 6 people.
Answer Snippets (Read the full thread at marineengine):
Back up ....
Re: Sea Ray helm bilge pump switch on or off docked is in our hands.
Than No grease at All....
Donno how yer pumps are wired Grease is Better,...
Re: Sea Ray helm bilge pump switch on or off docked? Ayuh,...
|
|
Where to exit bilge pump fitting so im going to install a bilge pump but where to put the exit as you can see in the pic the little black hole just beside the outboard is a little drain area for what i dont know but what i do know is if i get a decent...
Started by brianis on
, 11 posts
by 9 people.
Answer Snippets (Read the full thread at iboats):
Re: where to exit bilge pump fitting As long as you have the exit access the back....
Re: where to exit bilge pump fitting Go as high as you can, but don't get yourself in a position efficiently the pump will move water.
|
|
This is a fairly naive bilge pump question but I'd rather be safe than sorry that I didn't throw it out there.
Do I really need a bilge pump (maunual one) for an Ocean Kayak Trident 13? I weigh about 165 and do my best to only take necessary gear and ...
Started by YaknCast on
, 11 posts
by 10 people.
Answer Snippets (Read the full thread at texaskayakfisherman):
About a bilge pump for the inside of the hull or in the cockpit?
If you need either one, you got a problem:
If inside the hull - if your kayak is taking on enough water to need a bilge pump, you got: : Are you talking about....
|
|
I have a 1989 280 Sea Ray Sundancer, my bilge pump has gone bad or is at the point of no return. It's tripping the breaker after about 30 seconds or so after resetting it. Sure, I did wait a few minutes before repeating this action as not to cause any...
Answer Snippets (Read the full thread at boatus):
Do you....
Can you physically touch the pump with then engines in
place? If no, then you know what you have to others and you'd have to find it an cut it so you can pull the pump towards you to unplug or splice but it could save lots of money.
|
|
I finally got around to another little project of installing a second bilge pump on my boat. This all started a couple of years ago when I committed the huge boaters sin, of leaving the plug out. I've long since got over the embarrassment of that mistake...
Answer Snippets (Read the full thread at imhooked):
My second pump has a switch and I only turn it on when I am leaving it in the water down on the dock at the Gorge with....
The bilge pumps and down riggers are all wired to the Blue Sea panel.
A perko switch, and a Blue Sea fuse panel.
|
|
Posted 14 January 2012 - 11:25 PM
Hi all,
A quick question? can you use bilge pumps for hydro systems?
1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted. - Features:Fully Submersible - Easy clean snap lock strainer - Silent and vibrationless ...
Started by jj69 on
, 11 posts
by 5 people.
Answer Snippets (Read the full thread at uk420):
Thinking of using that to drain your system I'd be careful, all the gunk will clog the hell out of the pump.
|
