|
Post: #1 clutch..clutch clutch..
i am debating which one i should go for.
for the money, spec stage 3 with 6 pucks is top of my list.
stage3 is cheaper than stage 2(producing cost according to spec rep) but holding more torque.
as you know, my car is ...
Answer Snippets (Read the full thread at focuscanada):
My spec clutch seemed to engage very high on the pedal travel....
Thanks nate ill lookPost: #2 RE: clutch..clutch clutch..
Post: #11 RE: clutch..clutch clutch..
world, its very hit and miss with bully.
|
|
So im in the process of researching clutches and which would be best for the money and because enjuku only carries SPEC and ACT for the rb20, those are the two that ive narrowed down my choices to. i found a lot of guys saying that SPEC clutches were ...
Started by rbeast on
, 19 posts
by 10 people.
Answer Snippets (Read the full thread at 240sx):
You don't get and said "oh a stage 2 will be fine" and then... .
The pressure plate is already soft and that's really what you need .
Stage 2 clutch in my buddies evo 8 and it holds extremely well with minor difference in feel a new clutch disc.
|
|
Car is a mildly modified 06 GTO M6....weighs in at 4000lbs with me in it and makes 422rwhp/400rwtq with bolt ons and a mild cam seems like with the cam in it now on a hard launch it slipps the clutch in 1st gear also on a hard shift into 3 or 4th it slipps...
Started by torrid06gto on
, 13 posts
by 11 people.
Answer Snippets (Read the full thread at ls1gto):
When we pulled the serviceable....
LS7 clutch are a good choice if you don't of torque.
$500 or less brand new too.
The LS7 would be perfect for you right now.
And if you dont plan to make alot of passes at the track, just go with the LS7 clutch.
|
Ask your Facebook Friends
|
I have a t5 setup out of my 90gt car has 28000 miles original upgraded to tko setup so everything is for sale.
1. wc t5 w/ 28000 miles energy suspension trans mount and steel bearing retainer $700obo
2. lakewood scatter shield for t5 w/ block plate and...
Started by gerbenitz on
, 4 posts
by 3 people.
Answer Snippets (Read the full thread at corral):
I do $200 shipped for clutch right now! Ttt Ttt.
|
|
Just purchased a 2006 2500 4x4, manual 6-speed (have about 119,000 miles on it). When in nuetral and clutch pedal released, there is a loud "Klanky" noise from the transmission clutch area. I press the clutch in and goes away. The truck has a tennessee...
Started by jceclipse01 on
, 11 posts
by 7 people.
Answer Snippets (Read the full thread at cumminsforum):
The guy who did my clutch....
Sent from my iPhone using Tapatalk.
Lotsa threads on this.
It's normal for a G56 and aftermarket clutch.
Welcome to the world of aluminum-cased transmissions minus the stock dmf clutch.
Sounds normal.
|
|
GEN 4 Clutch The tranny is already down and the clutch needs replacement. what options do i have for a better clutch ? mcloud, centerforce ? whatelse ..
appreciate it thanks
VNM
Started by VNM on
, 21 posts
by 13 people.
Answer Snippets (Read the full thread at viperclub):
Every 2011 ACR-X Viper....
His clutch is the only official replacement clutch for the ACR-X Dodge Viper Cup race series and has been fully tested and approved by Dodge.
Re: GEN 4 Clutch Check out the latest offerings from Toddy at BBG.
|
|
Well I had a stage 4 competition clutch installed 5k miles ago, and experienced some serious clutch slippage yesterday. I got on it in first gear, and when I hit second the clutch slipped hard. A couple hours later I tested it in 4th at wot and it slipped...
Started by Drowe303 on
, 19 posts
by 5 people.
Answer Snippets (Read the full thread at nasioc):
There is no clutch in the world that doesn't have a break: : Well I had a stage 4 competition clutch installed 5k miles ago, and experienced some serious clutch slippage yesterday....
Smoked the clutch in the first 100 mi.
|
|
Had my clutch replaced 50000 Kms ago and at the time the effort to throw the clutch doubled. Workshop fitted "Safari" clutch instead of genuine (pissed me off considerably) but still stuck with problem. Other than the effort needed to push it the clutch...
Started by Rodbram on
, 14 posts
by 10 people.
Answer Snippets (Read the full thread at offroad80s):
The guy who did my 60 series Diesel fitted a Dyna truck clutch from a 2H Diesel, as Toyota then fitted the same clutch to petrol and ....
Haven't heard of a "Safari" clutch.
Some 60's had a booster, my old one with barn doors did not .
|
|
Southbend Clutch
I know they are big with the diesel crowd, but is anybody using their stuff in a drag racing oriented application?
Started by mshred on
, 12 posts
by 7 people.
Answer Snippets (Read the full thread at yellowbullet):
Anyone Re: Southbend Clutch
The question that comes to....
I know it would be a harsh hitting clutch and I am looking to be around 600hp and may spray 100 or 150
shot.
Thinking of that route.
Re: Southbend Clutch
Interested as well.
|
|
I'm going to purchase a clutch kit for my xp.There are alot of choices.DDP, EPI Holz. I would like to hear from you guys on which one you bought and the differences from stock that it made. I'm thinking the DDP but would like some real world input on ...
Started by jedster1 on
, 13 posts
by 8 people.
Answer Snippets (Read the full thread at rzrforums):
Everyone I've sold has put a smile on the buyers face a clutch kit i absolutely will do....
I sell the Holz Racing XP Clutch...
I'm interested I guess....I didn't realize the stock clutch was deficient product.
Proper engine braking.
|
