|
I've searched the forums and done some testing on my rig, but I still have some questions as to the exact functions of these options.
My mobo manual has them all listed as basically word for word the same thing....
Previously I had C1E disabled, C3/C6...
Started by Aaron_ATX on
, 11 posts
by 7 people.
Answer Snippets (Read the full thread at hardforum):
If you enable EIST and set windows to max performance, it will act the same as if EIST....
EIST/motherboard is handling the power saving.
C1E is power saving (Speedstep) handled directly by the CPU itself .
Ignore what eztune says.
|
|
Hello,
I am getting started with overclocking my 2600K on my Z68 FTW. I have noticed a strange phenomenon. With all the standard do-not-mix-with-overclocking stuff disabled (EIST, C1E, C3 Report), my chip runs at 3400MHz, no more, no less, regardless...
Started by RickC on
, 7 posts
by 5 people.
Answer Snippets (Read the full thread at evga):
Also PLL override should be turned on for anything ... .
It should not only mention that EIST needs to be enabledeist on should only affect you cpu downclocking during idle(it should go to 1600 or so at idle.
To disable it for these boards as well.
|
|
I have i5 2300 and P67 FTW. BIOS shows 3.8ghz but ELEET and CPUZ show 3.3ghz. Any ideas?
multi 38
Turbo enabled
vdroop disabled
PLL override enabled
EIST disabled
CIE disabled
C3 disabled
C6 disabled
Started by BTC guy on
, 4 posts
by 2 people.
Answer Snippets (Read the full thread at evga):
<message edited by wrinvert on Wednesday, February 01, 2012 3:51 AM> Darn, thanks... .
Non "K" chips can only go 4 bins over stock so 3.2 should be the max if you got 3.3 you go lucky .
The 3.3 is the best your going to get.
Your chip is not o/c able.
|
Ask your Facebook Friends
|
Ze C1E en EIST eens uit en zet je IMC op 1.3 lukt het dan wel?
Started by Sonicfury on
, 99 posts
by 38 people.
Answer Snippets (Read the full thread at tweakers):
Settings (bios 1.4):
Intel EIST Auto Intel C-State Enabled C1E Support Enabled Intel Turbo Boost P55-GD65 en de Turbo werkt goed met de volgende settings (bios 1.4):
Intel EIST Auto Intel C-State Enabled zaterdag 12....
|
|
Can you post a screenshot of what Throttle Stop looks like for you? If EIST and Cstates are not greyed out and checked you can uncheck them so they are both off... If you can do that it wont matter that you dont have those options available in the bios...
Started by mw86 on
, 7 posts
by 2 people.
Answer Snippets (Read the full thread at techinferno):
Ts.jpg yeah that sucks we need both to be uncheckable because one step is have both ... .
If you check/uncheck C States, but EIST is greyed out.
If EIST and Cstates are not greyed out and checked you can uncheck them so they are both off...
|
|
In mobo I have
i7 2600,
4 GByre RAM 2x2,
old 8400GS working perfectly on other builds
Using iBoot 3.0.4, HackBoot V6 and other boot cd and Retail SL 10.6.3.
When swap to SL DVD I have an ACPI kernel panic. See attacment.
This is what I have set in bios...
Started by MikOnMac on
, 20 posts
by 4 people.
Answer Snippets (Read the full thread at insanelymac):
Disabled
- EIST = Disabled
- C1E = Enabled / Disabled
- CPU Thermal Monitor = Disabled
- CPU C3 Report = Enabled / Disabled
- CPU C6 Report = Enabled / Disabled
- HPET = Enabled
- Internal HDMI.
|
|
Sometimes when i turn on my computer i get a 6A error so i turn it off by holding down the power button and turn it back on and it starts up fine, when the computer is running i don't get any problems and every time i restart my computer it starts up ...
Started by xGaZoo on
, 21 posts
by 9 people.
Answer Snippets (Read the full thread at evga):
All the drivers....
Ok updated settings Look the the EVGA web Site for your motherboard .
Http://www.evga.com/forums/tm.aspx?m=1424460
It would help if you would post your settings.
Copy the template and fill in your settings.
Here is a link to the template.
|
|
This is a template to use to track your stable Overclocks. Copy and paste then fill in the red areas with your info.
System Information
Mother Board ( Classified )
Bios ( 032 )
CPU ( 3960x )
CPU Cooler ( HeatKiller/water )
Memory ( Mushkin Redline PC3...
Started by iride4u on
, 15 posts
by 4 people.
Answer Snippets (Read the full thread at evga):
Feature
C1E ( Disabled )
EIST ( Disabled )
Turbo Mode ( Enabled )
C3 ( Disabled )
C6 ( Disabled )
C7.
|
|
Chris,
This is *probably* caused from EIST and/or C1E being enabled in your BIOS.
These features dynamically adjust the speed of your CPU (and voltage)
according to the CPU demand. You can try to disable them and see if things
stabilize, if they do then...
Started by jason@extremeoverclocking.com on
, 5 posts
by 5 people.
Answer Snippets (Read the full thread at omgili):
That didn't fix the boot issues, but it
does seem to have enabled ntp to run.
That's even with CPU frequency scaling enabled (running-enabled ACPI in BIOS.
Now are all in
the -1.5ms to 2.5ms range.
|
|
Hello fellow forums: I need feedback on my efforts to run Linx AVX Edition longer than 15 seconds. Here are my BIOS setttings:
System Information
Mother Board ( X79 Classified )
Bios ( 032 )
CPU ( 3960x )
CPU Cooler ( H100 )
Memory ( Corsair Vengence ...
Started by Bluebrains on
, 30 posts
by 8 people.
Answer Snippets (Read the full thread at evga):
I will test each setting from 1.4 to 1.45v today and tomorrow... .
Have you tried 1.4-1.45v? Just to see what it'd do?
Thanks, I will give it a try .
Have you tried 1.4-1.45v? Just to see what it'd do? EliteGeek91
VCCIO seems really low .
VCCIO seems really low.
|
