|
New here, looking for some assistance. I have a 6' 6" MM1 mounted on my '69 Chevy pickup (I think it was originally for a small Toyota). I bought the plow last year, cleaned it up, changed the fluid and redid a bunch of wiring. Worked great. I've since...
Started by jjorgensen52 on
, 4 posts
by 2 people.
Answer Snippets (Read the full thread at plowsite):
They can get pretty bad as they age.
Not a bad fix as long as the mounting bolts will come out and the threads in the housing are in good shape .
You're likely on the right path, blown O-ring on the base lug .
|
|
Hi,
A few days ago, I absentmindedly put brake fluid (dot 3) into the power steering fluid reservoir as it was at the min mark. Last couple of days, I have been noticing that the power steering cuts out sometimes esp, at slow speeds like during parking...
Started by redlude88 on
, 18 posts
by 9 people.
Answer Snippets (Read the full thread at preludepower):
The brake fluid....
) your front the fluid.
drained
put everything back together, fill up with fluid and while the wheels are still off one or all of the lines going to the rack ( the more you pull the faster you drain.
|
|
I only drained 3 qts out of the transmission... i should have checked the level before i drained.... has anyone drained less than 4qts?
i was able to put in 3.75 qts and the car was level
Started by cobradb on
, 5 posts
by 4 people.
Answer Snippets (Read the full thread at priuschat):
The first time I....
Has anyone drained less than 4qts?
i was able to put in 3.75 qts and the car was level form the manual.
I should have checked the level before i drained....
|
Ask your Facebook Friends
|
I need instruction and pic of how to drain and fill transmission fluid.
Started by fj2007cj [OP] on
, 4 posts
by 4 people.
Answer Snippets (Read the full thread at fjcruiserforums):
Is the drain and the other is the overflow for checking the fluid level.
|
|
Finally getting around to pulling the oil burning b21 out to start the process of putting a rebuilt b20a5.
Last time I drove the car the radiator kind of went to hell on me and was spilling fluid everywhere. When I drained the radiator and the tranny ...
Started by Porterj5 on
, 14 posts
by 7 people.
Answer Snippets (Read the full thread at preludepower):
Refill the tranny with new fluid, take it for a drive about 30 minutes S, I drained it 100%....
When I drained the radiator and the tranny last weekend, both had a gooey light and let it all drain out.
fluid everywhere.
|
|
Hi guys. I just have a couple of questions.
I'm thinking about changing automatic transmission fluid on my 2000 G20.
Non modified, 120,000 on it.
Is it okay to use Mobile 1 synthetic fluid?
It's going to be simple drain and refill.
How much fluid does...
Started by viget on
, 11 posts
by 5 people.
Answer Snippets (Read the full thread at g20):
Once fluid is done draining put bolt back into place and "torque to....
Remove said bolt with a drain pan underneath.
I checked the fluid that I have just drained, and it a little more than 2 quarts pan.
More than 3 qts.
|
|
Just changed my engine oil and filter with the 10-40 kit from az_amsoil. Old engine oil (also Amsoil) looked like good used engine oil with no grit or other readily apparent contaminants. Drained the front diff (also Amsoil 10-40) and it looked as clean...
Started by Freeezen on
, 13 posts
by 8 people.
Answer Snippets (Read the full thread at teryxforums):
Its a great kit.
Amsoil for a kit that has 4qts of 0w-40, oil filter and 1 qt of fluid for the rear diff.
|
|
Just did a complete fluid change on my machine at 10 hrs. It seems the front diff , tranny and transfer case all had the same fluid, looks like hydraulic fluid, (about the same consistency) and all smelled the same. Yet the AGL polaris fluid for the tranny...
Started by Creisol on
, 12 posts
by 10 people.
Answer Snippets (Read the full thread at rzrforums):
The rear diff and the t-case were a different story, the fluid i drained from them was more like 90 wt Premium ATV Angle Drive Fluid" sounds like what came out of mine when i changed fluids
the fluid the factory would....
|
|
Is there any paint that is truly resistant to to brake fluid? I need a paint that won't lift or crinkle if it comes into contact with brake fluid (Dot 3 or Dot 4 fluid). Any suggestions?
Started by Marcosmadness on
, 20 posts
by 12 people.
Answer Snippets (Read the full thread at jalopyjournal):
Shawn "Any nice paintjob....
Any nice paintjob will turn to mush if you so much as say "brake fluid" near it.
Silicone fluid does cost more...Last time I bought it, I got a quart to brake fluid.
I drained out looked as good as new.
|
|
Right now I'm using automatic transmission fluid in my pump. Is that okay? I wanted to replace it this year with real Western Hydrolic Fluid, but everyone, including the dealer says the trans. fluid is fine.
What's everyone else using???
Started by MIAWPUKEK on
, 20 posts
by 11 people.
Answer Snippets (Read the full thread at plowsite):
How do you drain fluid so you get 95% of the fluid out.
|
