|
Posted Yesterday, 07:46
I did some work on my rear brakes yesterday to stop the moooing. Feel free to mock me cos I've made a catastrophic error - I've used red loctite (271) on the guide pin bolt instead of blue. Rest assured they are locked in place...
Started by piggoy on
, 16 posts
by 8 people.
Answer Snippets (Read the full thread at briskoda):
I wouldn't use....
guide bolts o thought you meant the ones which the caliper slides on so would only have a short thread ? Posted Yesterday, 14:25
I see what you mean now the set screw fits into the slider pin Posted they'll be to take out.
|
|
I started the tear down on the B230F last night and one of the things I ran into is that concerned me is that the guide pin on the crank pulley is sheared off.
http://imgur.com/a/v9ibc#7
http://imgur.com/a/v9ibc#9
(sorry for the crappy cell pics)
How ...
Started by bighornctd on
, 12 posts
by 7 people.
Answer Snippets (Read the full thread at turbobricks):
With the hole.
Are you speaking of the crank gear? Yes, the pin/key looking thing that links the crank gear of tissue paper and put it in the hole on top of the crankgear (where the pin should be).
|
|
Right ppl i have have compiled a full set of loom changes for any XR2i 8v loom to OFAC or OFAB and from OFAC to OFAB.
These pin changes alow you to run FRST management without an Amal valve, if you decide to add an amal valve for a reason you will need...
Started by Andy.B on
, 34 posts
by 14 people.
Answer Snippets (Read the full thread at fiestaturbo):
If you dont move the Co2 wire to that pin you will have no Co adjustment at all, prob make it run rich if you dont move mean remove pin 2.sorry i hope....
You will need to move the 2 wires stated in the guide.
And OFAB and visa versa.
|
Ask your Facebook Friends
|
Marketing Guide to Pinterest: Pin It to Win It
Started by Eric Do Rêgo Barros on
, 1 posts
by 1 people.
Answer Snippets (Read the full thread at pinterest):
|
|
Anybody know the metric size of the bolts that can be used for guide pins on a spline lube ? I know they need to be approx 4in long. Tnx, Lanny
Started by khelsea on
, 2 posts
by 2 people.
Answer Snippets (Read the full thread at bmwmoa):
Http://www.bmwmoa.org/forum/showthre...ght=guide+pins.
From a previous thread...
|
|
I removed a power-steering sector box off a 671 and replacing it with a manual sector box. The problem is that 671 transmission has guide pins for the sector and the one I am putting on has no holes for the pins. I tried to pull them out with vise-grips...
Started by KCTractors on
, 2 posts
by 2 people.
Answer Snippets (Read the full thread at ytmag):
Thanks Tony.
Hello KC , All power steering tractors have Dowel Pins to keep the steering box from moving Manual steering does not drive them down flush or all the way through and out the bottom unless you have stud remover or can get one .
|
|
I removed a power-steering sector box off a 671 and replacing it with a manual sector box. The problem is that 671 transmission has guide pins for the sector and the one I am putting on has no holes for the pins. I tried to pull them out with vise-grips...
Started by KCTractors on
, 2 posts
by 2 people.
Answer Snippets (Read the full thread at yesterdaystractors):
Thanks Tony.
Hello KC , All power steering tractors have Dowel Pins to keep the steering box from moving Manual steering does not drive them down flush or all the way through and out the bottom unless you have stud remover or can get one .
|
|
Hi guys,
having trouble finding a guide pin for the older life-like chassis
its the one that holds the axle in place.
any ideas?
thanks.
Started by helivaguy on
, 2 posts
by 2 people.
Answer Snippets (Read the full thread at hobbytalk):
The M-car guide pin/...ent-parts.html
Incidentally, the M-car guide pins are a very good thing to have around if you.
In from the top they can get dislodged while running the car or in a wreck .
|
|
Tweet My timing chain guide rail pin cracked. Anyone have extras? Hey all,
In the middle of the chain/tensioner/guides job. Got a few of my rail pins out, then this had to happen. I was counting on simply re-using all of the pins. Anyone have extras lying...
Answer Snippets (Read the full thread at benzworld):
Cheers, MBL You're probably right, and they are inexspensive
....
Good luck on your quest.
But thats just me...
I'd be inclined to order/purchase a new one..
|
|
The Ultimate Pinterest Guide For Photographers dessert
Started by Khadijah City on
, 1 posts
by 1 people.
Answer Snippets (Read the full thread at pinterest):
|
