|
Hi Folks.
This thread is for DX reports on HF.
Started by VK6ZMS on
, 15 posts
by 6 people.
Answer Snippets (Read the full thread at warsug):
Everything these days causes....
There was an article on the WIA news a few weeks back about how idea .
Those globes are notorious.
VK6 Quote with hf.
Everything these days causes some issue with hf.
In the dark then, but thats not a bad idea .
|
|
So, this is my Cayman HF 110 that i modified a little. It came with the Omer america shaft with shark fins witch caught my gloves sometimes and wasn't easy on dyneema wishbones. I put two 16 mm bands instead of the single 18mm band. I put Q power line...
Started by cbchrisbotelho on
, 15 posts
by 7 people.
Answer Snippets (Read the full thread at spearboard):
The HF's cuttlefish shape allows it to handle more power than a standard pipe gun annoyance with smaller bands - the band holes for the HF are so huge, since they need to allow well enough with the reel on and the shaft out....
Better choice.
|
|
What can this welder do? (Cheap HF welder) What can this welder do?
http://www.harborfreight.com/cpi/cta...emnumber=94056
I know it's a piece of junk and probably won't last 3 months, but they have them on sale for 90 bucks and I was thinking about picking...
Started by Horsepower844182 on
, 15 posts
by 12 people.
Answer Snippets (Read the full thread at fullthrottlev6):
Go to Harbor Freight, buying it....
Most of the hf ones tend to break pretty.
99 Firebird 3.8 M5 TTop
79 Ramcharger on here discussing this welder and how it wasn't very good .
Scavenging your broken dreams.
Be a whiz with an actual gas rig.
|
Ask your Facebook Friends
|
I know a few folks here own a USRP.
I use mine with an LFRX board and an active antenna for HF reception. I use HDSDR and winrad for the most part for the software front end.
How does this compare to dedicated SDR receivers like Perseus, Excalibur etc...
Started by NYG on
, 5 posts
by 3 people.
Answer Snippets (Read the full thread at radioreference):
The USRPs generally have more potential than one of the dedicated HF to plug it in and use....
The Excalibur or the Perseus seemed to me to be a better, more complete, turn key HF system than USRP with HF GPS Sync or similar features.
|
|
I'm looking at getting a icom 706 for mobile use. Looking for a antenna. Was wondering if you guys use hamsticks? Or saw the antenna uhv-6, but looks little flemsy. Anyone used these? dont really want to use a bug catcher. looking to see what you guys...
Started by bluestallion on
, 15 posts
by 11 people.
Answer Snippets (Read the full thread at radioreference):
For single band work: : I have had more than 4... .
One rule of thumb is that if it ain't big and ugly it isn't going to be much good Tarheel I have had more than 40 different HF mobile antennas over my 50 ham career.
For the lower HF bands.
|
|
A friend gave me a Lafayette HA-600A he said i could use copper wire as an antenna he said use about 50 feet and go around a room on the ceiling my question is this should i just use the ceiling or should i use the ceiling and a wall so i have all 3 axis...
Started by FCVPI99 on
, 17 posts
by 8 people.
Answer Snippets (Read the full thread at radioreference):
It can_manual.pdf what is the difference between HF600 and HF 600A
after a little work and a small amount while using that rig.
But, this is what we all had to deal with “in the day” .
Transmissions in 50 kHz on HF.
|
|
It seems to have worked so im of to a good start
now lets see if it can oc any further
This post has been edited by Dasa : Mar 8 2012, 12:48 PM
Started by Dasa on
, 15 posts
by 4 people.
Answer Snippets (Read the full thread at atomicmpc):
From the pics it seems you didn't have to drain your loop, just remounted the block... .
The DC2T looks quite different from a reference card under the hood, much nicer haha .
Temps look awesome too.
Nice, looks like the gypsy copper turned out really well .
|
|
Hi guys,
A buddy at work has this in a trailer that we store crap in at our job. It's his buddies that he's trying to sell for him, and thus I am trying to sell for my buddy. Either way, owner wants $250! Its old - its dirty, but if I had 230v I'd pick...
Started by Jon K on
, 5 posts
by 4 people.
Answer Snippets (Read the full thread at weldingweb):
It's certainly a decent deal with....
You might do the same thing and then you'd have some TIG gear .
I'd clean it, paint the cover, make it sexy and turn it .
No one? Too far away or I'd grab it for resale (after keeping the TIG parts, filler and cylinder) .
|
|
HF 360 water in tubes... any ideas how to remove it? Hi, I have an HF 360 that we were unloading from the truck when it got snagged on a bad spot on my tailgate leaving 2 small holes in the center floor tube. I patched the hole after were done fishing...
Started by Talbotsgt on
, 7 posts
by 3 people.
Answer Snippets (Read the full thread at iboats):
BTW I saw your....
Thanks again.
Good luck!
Dave Re: HF 360 water back.
Any ideas how to remove it? Talbotsgt,
You may have tried this already bring the water to an existing 'hole', and air pressure assist it out .
Re: HF 360 water in tubes...
|
|
Posted 29 April 2011 - 08:13 PM
Pretty Nasty Rig Contest.. (May 1st~ 29th)
Basicly the name says it all, who has the Prettiest and who has the Nastiest Rigs at TRP
All entries need a Side view, Front/Side view & 1 or 2 night shots (no more)
You have 3...
Started by Raymo on
, 20 posts
by 7 people.
Answer Snippets (Read the full thread at theraptorpit):
Posted 03 May 2011 Supreme HF, MCR-320, MCP-355 with XSPC Res Top), ASUS P8P67 WS Revolution, AMD HD6990 + AMD HD6970
Thanks Hokie! Posted 05 May 2011 - ....
Zero to servers to my main rig
there are some nice ones and some fk ugly ones too.
|
