|
Just as the title says. If you wrap your exhaust system in heat wrap is that sufficient to do the job of the heat shields?
Started by ulyssis on
, 10 posts
by 7 people.
Answer Snippets (Read the full thread at iwsti):
Once removed and wrapped....
Wrap or coating + turbo blanket should come first degrees.
Either blanket the turbo or use a heat shield.
Hope this helps! Heat wrap is effective, but if you.
Your time or money with the stock one.
|
|
Have my down pipe off for a bit which is another story. Regardless, thinking of picking up some heat wrap stuff.
Was looking at grabbing 2"x25' DEI titanium wrap, eight 14" stainless zips, and a can of the spray.
Suggestions?
Started by Heide264 on
, 15 posts
by 9 people.
Answer Snippets (Read the full thread at clubwrx):
I'd rather ceramic coat my crap as wellGet the lava wrap instead (doesn....
EVERYTHING, glued header-wrap onto the insides of ALL the heat-shields and fab'd up an insulated won't need to be soaked up by heat wrap to burn.
|
|
Titanium or Fiberglass Heat Wrap??
So i have a 1 piece SS header on its way to my door as we speak. As it looks now im going to be wrapping it. I've read up somewhat on it (the whole crack and pre rust things) but i dont see the issue if you evenly wrap...
Started by revilingfool on
, 11 posts
by 7 people.
Answer Snippets (Read the full thread at clubrsx):
That mount mounts? any other positives? yea im lookin for the best way to wrap my bcrh also, titanium wrap.
All those innovative mount death have me worried i need to wrap that shit...
For me.
|
Ask your Facebook Friends
|
As the intercooler is directly above the manifold on my car I'd like to get some heat wrap and try to reduce the heatsoak, especially in the summer months.
Seen some on ebay but I'd rather not go there!
Can anyone recommend some and where I can get it...
Started by E55EX_RACER on
, 20 posts
by 7 people.
Answer Snippets (Read the full thread at wheels-inmotion):
Looks like it is cast iron so I've forgotten that idea modifying a heat ....
|
|
Hey guys I've been doing some heat shielding/wrapping on my 740 and I'm kinda worried about the turbo being too close to the hood and possibly warming it up too much. Seeing as how its a aluminum hood that can be bad. I have a OBX header and a Holset ...
Started by Steve-O740 on
, 12 posts
by 6 people.
Answer Snippets (Read the full thread at turbobricks):
I've There is an aluminum/plastic heat wrap that I have bought in the past that is heat resistant to 400F, I wouldn't useI ....
They may have a different paint for the heat wrap if used on headers.
Is rated for headers.
|
|
OK,
Following on from the oil line on the OC going I had oil in the heat wrap.
Now, I've been advised it will burn off. But **** me how long will it take to burn off? I've driven it about and all I see is a haze of smoke and the smell in the cabin it'...
Started by The Gimp on
, 12 posts
by 6 people.
Answer Snippets (Read the full thread at surreyscoobies):
Degreaser....
Or just remove from effected and re-wrap.
|
|
Tags : None
I hate to say it, but it's a 6 game series.
Nonetheless, the journey will still be in effect.
Mets - NY Giants - NY I slanders - NY Red Bulls - Knicks Heat All Day Lifelong Fan Since 2010 Last Edited By: Oasis 05/23/12 7:13 PM. Edited 6 times...
Started by Oasis on
, 21 posts
by 15 people.
Answer Snippets (Read the full thread at yuku):
T
Reppin the 260
FLO holdin down Indiana 5 game gentlemen sweep, seems to be our MO 4-0
Heat win every game by 10+
Only chance I'm wrong is if there's a game where the Heat aren't at full strength are young and hungry, it should be a good....
|
|
Howsit Judd
can you bring me a roll of heat wrap on sat ?
Started by golfnut on
, 2 posts
by 2 people.
Answer Snippets (Read the full thread at za):
|
|
If its stainless, stay away from heat wrap, if its mild steel go for it...
Started by djt on
, 4 posts
by 4 people.
Answer Snippets (Read the full thread at ozhonda):
Well, I wrapped my HKS Headers which are SUS304.
To save a bit of heat....
Even if you could heat wrap stainless
Plm headers are 53xy.
To answer your second question, yes, may as well change it now .
|
|
Whats the advantages/disadvantages from heat wrapping de cat pipes and or manifolds? is it worth it?
Started by sri turbo on
, 10 posts
by 8 people.
Answer Snippets (Read the full thread at astraownersclub):
Stops radiant heat from soaking into other parts melting and heating up other components gotta re do it :\ The only wrap worth using is DEI titanium! The only issue is if the wrapped component doesn't like the extra heat....
|
