|
I figured you guys might know where i could locate a milling head for my horizontal mill.
The mill was bought from TAFE at a very good price, but i didn't have the vertical milling head attachment. It has provision for one, but after looking through the...
Started by seafurymike on
, 15 posts
by 6 people.
Answer Snippets (Read the full thread at woodworkforums):
The mill was bought....
Has anyone thought of making a unit which bolts to the dovetail of the horizontal.
|
|
Good day folks,
I need to do some honest to goodness, old fashioned slot milling on my K&T 2H horizontal milling machine.
I will be making some slots of varying width from about 1/4" to 7/8" in 1018 steel that is 5/8" thick 4" wide and will run the length...
Started by vonblowseph on
, 13 posts
by 9 people.
Answer Snippets (Read the full thread at practicalmachinist):
I am able.
The mill was designed for cutting oil not water sol.
The whole trick to running wheels on a sturdy horizontal is keeping the stock from moving oil flood and my cutters last forever.
At the edges.
|
|
I would like to find a small HBM, but they are few and far between. Is there another machine like them out there. I have a few jobs that require angled hole to be drilled on the edge of parts. A HBM with rotary table would be just the ticket. Trying to...
Started by Scott H on
, 20 posts
by 15 people.
Answer Snippets (Read the full thread at practicalmachinist):
The smallest horizontal boring mill that I know of is the Autometric made by Kearney & Trecker are talking about and I found the best solution was to buy a good horizontal mill with a 50 NMTB spindle was to buy a good horizontal....
|
Ask your Facebook Friends
|
This is a horizontal head for a 2UVR or 2VG Tree mill. The first photo is the head and the accessories are in the second. Does anyone know what the parts in the second photo, shaped like the letter 'J', are used for?
Thanks,
Bob
Started by BobP on
, 5 posts
by 3 people.
Answer Snippets (Read the full thread at practicalmachinist):
Javy,
Since you are in So Cal, there was a gentleman from Taft selling a Tree horizontal head on Craigslist and eBay for $175.oo within the last year.
These were important parts of the horizontal head.
|
|
I am buying three machines.
1) Axelson 16-48 or so lathe with moderate wear
2) Monarch 16-30 model C or some such lathe, with severe way wear
3) Cincinnati 50 taper horizontal mill.
The price is $1,000 for all.
I am thinking what to do with them. My plan...
Answer Snippets (Read the full thread at diybanter):
The price tooling for a boring mill or horizontal cnc, or it could serve as a very nice starting point or some such lathe, with severe....
Model C or some such lathe, with severe way wear
3) Cincinnati 50 taper horizontal mill.
|
|
This is a 16x63" table universal horizontal mill made by Fritz-Werner of West Berlin. Located in Oakland, Ca. It has inch leadscrews, and an NMTB 50 spindle. It is not hooked up to power, and I do not know if it has any mechanical problems, but I would...
Started by Halcohead on
, 4 posts
by 3 people.
Answer Snippets (Read the full thread at practicalmachinist):
I worked.
All the Friz-Werner machines were well built and very powerful .
It can climb mill.
|
|
Looking great Gadget!
Started by KHK on
, 5 posts
by 4 people.
Answer Snippets (Read the full thread at longevity-inc):
This took a long time because.
I finally finished the spindle journal boring for the mill project.
|
|
Hey All:
I live in Chattanooga and have been to lots of vertical caves but only a few horizontal caves, such as Xanadu and Camp's Gulf. Can I get some suggestions for horizontal caves that don't require much crawling. Not a NSS member but a SCC member...
Started by ktm125 on
, 14 posts
by 11 people.
Answer Snippets (Read the full thread at caves):
How could we discuss TAG horizontal caves and not mention Tumbling Rock? I guess everyone.
Bluff River - AL Ellison's Dug Entrance is a 2 hour horizontal walk, down and back if you resource.
Cave Book.
|
|
Hello
Have bought a CNC milling machine Deckel FP2NC from year 1985 Machine No. 2771st It has been stationary for some years.
So there were some faulty electronics parts on it was time to change before it was up and running again, but now there arose ...
Started by jhdata on
, 11 posts
by 4 people.
Answer Snippets (Read the full thread at practicalmachinist):
I am guessing that you are....
On the one I had, if I adjusted the horizontal quill in and out just a bit it would go away, and it would problem.
What sound are you hearing? It is pretty common for the horizontal spindle of an FP2NC to "sing.
|
|
I bought an 84 Mitsui Seiki H3RC horizontal mostly for scrap, mainly because it was cheap.
The machine last ran a few days ago, it has glass scales but old DC servos and a Fanuc 11M control, 2 pallets with 4th axis, 7k spindle.
Unfortunately it weighs...
Started by xg1745 on
, 13 posts
by 6 people.
Answer Snippets (Read the full thread at practicalmachinist):
The mori Seiki mill I have ....
I bought.
Retrofitting the mill never crossed my mind.
My CNC mill is from 1982 with a 6M control tooling and an indexer worth the price alone.
Funny what some people think is scrap.
Motors on fleaBay.
|
