Omgili - forum search, search forums  
  

Discussions about idling at 600

Displaying 1 - 10 out of 3,170 discussions.  
RSS Feed Options
Time Frame: (Any time)   Minimum number of replies: (2)   Minimum number of discussing users: (0)
  |  

Page: 1   2   3   4   5   6   7   8   9   10  
Keep this page open to be updated with the newest discussions automatically.
Hey I have a katana 600 2003 I recently bought.to get it to run I have to leave it on with the choke on for about 5 mins till it goes to around 6k rpm and then I can turn off the choke and it will idle once warmed it idles fine at 1.2k rpm.is this too...
Started by on , 4 posts by 2 people.  
So, you need to clean your carbs.
They aren't allowing the full amount of fuel too pass at idle.
You're carbs are dirty, in particular, the pilot jets.
Yes, 5 minutes is WAY too long for a warm up time .
Let's say my computer is downloading a huge update, or maybe I want to perform a slow virus-scan that's likely to take hours. The question is, my machine is gonna be up all night, sleep/hibernate is not an option, but it's not gonna need much processing...
Started by on , 4 posts by 4 people.  
Let's assume that your Power Supply unit can go up to 600 Watts and that for some the night: (600 * 8) / 1000 = ~5 kWh If you pay $0.20 USD per kiloWatt, that night cost you 1 dollar.
Hour level.
I went through the Hoboken train station today and have two questions: (1) There was an F40PH coupled to a string of passenger cars, scheduled to depart a few hours after I went through. As far as I could tell, the train had been in the station already...
Started by on , 15 posts by 10 people.  
Why) and that transit authority prohibited idling (for buses), since it wasted money and was bad idling was to keep the coaches warm....
Yet the locomotive was sitting there, idling, with diesel fumes coming out of it.
If not longer.
Ask your Facebook Friends
Hi, I have a carb Zen (1999) with 83000Km on ODO. The car has 3 problems which I'm describing below: i) In the morning the when I start the car I generally have to push the accelerator a little to keep the idle RPM stable at 800. Without the accelerator...
Started by on , 15 posts by 8 people.  
I think you are running an extra-lean mixture, which is the root of all your problems .
Km/l on a carb Zen is just terrific, especially in Kolkata .
When i first got the bike I had a problem with the Battery, the garage i brought it to were chargin through the arse so they charged it up before i took it away so i could get it to another garage, only thing is at the time they turned the idle up to ...
Started by on , 4 posts by 2 people.  
Answer Snippets (Read the full thread at boards):
The bike is warmed up and idling as it is now and turn them down then yeah? Yeah, just get it up.
Hello everybody, my 2003 Envoy 4.2L has been idling at 900 after I cleaned the TB, replaced #2 coil, oil, oil filter and spark plugs...smh...it only has 83K miles on it and I keep her well maintained. Any suggestions as to what might be the prob? No SES...
Started by on , 8 posts by 5 people.  
Hope this helps Thanks a lot...I disconnected the battery and the idling dropped to 600rpm...now it fluctuates...goes to 800 then back to 600...I ordered an ac delco fuel filter to see if maybe I had.
I have a 97 ZR 580 EFI that will idle at about 1800 when I just start it when it is warmer outside and will high idle (approx. 3500) when colder outside and idle down once the engine is warmed up. Seems pretty normal to me. The weird thing is that when...
Started by on , 10 posts by 5 people.  
I have a 97 580 and 98 600.
Your idle is not abnormal.
Remnar said it is based on dropping resistance.
Hi all, I am new to this site and just bought myself a 97 zrt 600. The machine has black magic pipes, black magic clutching, and 3 uni pods instead of air box. Got it for a good deal, as he couldn't get it to run right. It just had the top end rebuilt...
Started by on , 4 posts by 4 people.  
High idle and then slows down when ....
The telltale is the idle.
Your sled is leaninhg out.
What jets are in there now? Does it run better after you cleaned the carbs? Have you done a vacuum leak check? You have a air leak or plugged carbs .
My cbr 600 puttered to a stop one day while idling in the driveway. i found it was not getting fuel. i replaced fuel cut off relay and power relay. still no juice. jumpered fuel pump and turned key, spits plenty of fuel. not sure what to check next. any...
Started by on , 6 posts by 2 people.  
Originally Posted by alsimo71 my cbr 600 puttered to a stop one day while idling in the driveway.
I just got a GSXR 600 and am having a few issues with it. Originally it would not idle when started, but I found out that the choke cable was seized up and since replacement it now idles at around 1K RPMs. Looking for that issue, I also replaced all of...
Started by on , 13 posts by 3 people.  
Answer Snippets (Read the full thread at gsxr):
Thoughts at this point?.
Tried to start it up again few seconds for the rev to settle back down to idling speeds.
Then the bike shut off.
Engine) and then started idling rough and knocking.
Page: 1   2   3   4   5   6   7   8   9   10  

Related Message Boards & Forums

  • Z/ZL/ZR/ZRT/Tcat/EXT - ArcticChat.com - Arctic Cat
  • 2002 - 2009 TrailBlazer/Envoy Tech - Chevy TrailBlazer TrailBlazer SS and GMC Envoy
  • Mechanics 101 - KatRiders.com
  • Super User
  • Motorbikes - boards.ie
More Information


Forum Search About Omgili Help Plugins Forum/Board Owners Privacy

i
In Title
In Topic
In Reply
Exclude
Boost