|
Wtb stock roller cam and rollers 2.3 and stock ranger header in good shape let me know what you got thanks jeff
Started by 29 avenger on
, 11 posts
by 6 people.
Answer Snippets (Read the full thread at 4m):
'95 and up roller followers won't work with the 11/32" valve stems....
The motor Be aware that Ford changed the valve stem diameter in '95 .
Got a stock roller cam and the roller rockers.
Cam and rollers I may have what you need.
|
|
Alright for a while now ive been thinking of putting hydraulic roller lifters on my solid cam but have heard that some of the ramp rates on solid roller cams are to steep and will destroy the lifters but compared to most roller cams out for big fords ...
Started by 79Bronco429 on
, 14 posts
by 4 people.
Answer Snippets (Read the full thread at 460ford):
|
|
I found a fairly cheap '72 Chevelle roller on CL this week, checked it out and brought it home yesterday! The guy who had it 2 owners ago installed a S&W back half kit and a 8-pt roll cage. I has a 9" Ford-style rear, Strange axles, Wilwood rear disc ...
Started by riskyvt on
, 14 posts
by 10 people.
Answer Snippets (Read the full thread at chevelles):
I have my 66 street car and bought.
Its the way to go nowadays buying a good roller.
Good luck with it...I have been casually searching for another thats already chopped up and a roller road myself.
|
Ask your Facebook Friends
|
Started by RexManningDay on
, 14 posts
by 4 people.
Answer Snippets (Read the full thread at reddit):
I'm usually a very happy....
"That's what a relationship is to you for a minute .
I'm a light bulb go off in my mom's head just based on her expression.
"I just haven't met the right person" "I'm so busy with school and work." etc, etc.
Answers.
|
|
I just was reading a post where they mentioned a mid-roller was someone who spends $500-1000 per day. If that's the case, a low-roller is up to to $500, and high roller is over a day $1,000?
Started by Escaper on
, 11 posts
by 8 people.
Answer Snippets (Read the full thread at tripadvisor):
The casinos consider me a mid-roller because I do about $15,000 a high-roller (or....
How it's gambled also matters.
To me, a high roller is asking.
Everyone has their own definition of a high roller.
Nah, not that cut and dry.
|
|
We have been heading toward a shooter that has spinning wheels on both the bottom and top side of the ball. By setting the speeds differently, we can get a desired amount of backspin.
But I'm thinking that in addition to backspin influences, this will...
Started by jvriezen on
, 15 posts
by 11 people.
Answer Snippets (Read the full thread at chiefdelphi):
Just look at the torque and how fast that ball gets moving in a short period of time...it just wouldn....
So if there's a vote, I pick the 2 roller shooter.
Your spin as well.
|
|
Solid Roller vs Hydraulic Roller
Which is better for power,maintance.I'm building a 347 that will be on the street some but mostly for the track.Not wanting to spin the motor no more than 7000.
Started by 83_Mustang on
, 5 posts
by 5 people.
Answer Snippets (Read the full thread at yellowbullet):
Just make sure to checkRe: Solid Roller vs Hydraulic Roller
Go solid roller Re: Solid Roller vs Hydraulic Roller
....
Re: Solid Roller vs Hydraulic Roller
If your going to race at all, SR.
Around.
|
|
Die Roller Test Thread II Here's a thread for testing out the Die Roller!
Started by Roland St. Jude on
, 30 posts
by 20 people.
Answer Snippets (Read the full thread at giantitp):
Re: Die RollerRe: Die Roller Test....
[roll0]
[roll1]
[vroll]24d24 [roll0] Re: Die Roller Test Thread II
[roll0][roll1][roll2] Just trying something.
Roller Test Thread II
Just checking to see if I have the coding right.
|
|
What roller lifter would you recommend?
I have a sbc 406 with about a 600 lift cam. What roller lifter would you recommend?
Started by knkracing on
, 11 posts
by 10 people.
Answer Snippets (Read the full thread at yellowbullet):
Re: WhatRe: What roller lifter would you recommend?
Solid roller? Hydraulic Roller? Drag? Street? What: What roller lifter....
Re: What roller lifter would you recommend?
Just bought Morel's also.
Never did fail.
|
|
The only difference between a Roller and non-roller block is the two tapped holes in the lifter valley correct? If they were tapped, then it could accept stock mustang roller lifters?
Started by Diabolic on
, 11 posts
by 6 people.
Answer Snippets (Read the full thread at nloc):
|
