|
Twitter rumours say that ICE689 lost a wheel on takeoff, and is currently circling:
http://www.flightradar24.com/ICE689
Is there a "normal" procedure for landing with damaged landing gear?
Started by Thoie on
, 15 posts
by 8 people.
Answer Snippets (Read the full thread at boards):
The aircraft burned off fuel the altitude the quicker they... .
That what appeared to be a main wheel off the 757's landing gear was found at the departure runway wheel off the 757's landing gear was found at the departure runway.
|
|
On scratch builds what kind of wire is the landing gear sopposed to be made out of?
Started by rsvector on
, 11 posts
by 8 people.
Answer Snippets (Read the full thread at rcgroups):
Duty wire gear but requires more heat and cleaning away of corrosive flux residue, use a torch.
|
|
Hey,
So I fly a lot, and have always wondered; at what phase in my approach should I lower my landing gear?
At the moment, I tend to lower it at about 2500 AGL.
(Question assumes we are flying a commercial jet 737 or greater)
Thanks in advance!,
Munji...
Started by Munji Goud 1166721 on
, 15 posts
by 15 people.
Answer Snippets (Read the full thread at vatsim):
I use....
When on final (ILS or Visual simultaneously.
To the instruments, the landing gear is usually extended around the final approach fix (around five miles the gear inside of 10 miles, when reached on the landing checklist.
|
Ask your Facebook Friends
|
I just got all my new equipment going a few days ago and I've only hovered in the backyard twice. And only one battery was used for the 2 charges, so the rest haven't even been charged.
I just got word from DJIUSA that my S800 that I ordered a while ago...
Started by jasper7821 on
, 15 posts
by 7 people.
Answer Snippets (Read the full thread at rcgroups):
|
|
The new kbdd skids are now available here. KBDD - White Landing Gear - MCPX | eBay
Apparently they are really durable. I just ordered some and will be doing a group test with the airtimerc bullet proof skids and the xtreme carbon skids on my blog when...
Started by raechris6 on
, 15 posts
by 7 people.
Answer Snippets (Read the full thread at rcheliaddict):
No links had popped off, gear was still in....
Also the horizontal bars on the landing gear that hold the battery had snapped as well .
No, the landing gear had actually snapped off in the frame!!! at both insert points.
|
|
I was going to get a gorilla gear landing skids for my 450 pro but I thought, at £10, surely I could just paint my existing ones?
Has anyone done it? any tips? Do I just use rc car lexan paint?
Started by muscleflex on
, 15 posts
by 4 people.
Answer Snippets (Read the full thread at rcheliaddict):
And it's in white so hopefully a treat! The only issue ... .
But never thought of doing it for skids Will do Muscleflex - what 450 landing gear do you use? i have the trex 450 pro (not v2) so the landing gear is all one piece.
|
|
I'm going to be putting together a 747-8, but I'm having trouble figuring out what the best way to make the landing gear is. Ideally, this will be as scale as possible, with sequenced doors and accurate-looking landing gear.
Anyone have any suggestions...
Started by MrADT on
, 15 posts
by 9 people.
Answer Snippets (Read the full thread at rcgroups):
Good luck with it! Yeah, I'll need some help in with the landing gear on my build, even though it will not retract.
It goes.
|
|
So, what would be required to spur the development of Stukas with folding landing gear? How would this affect the performance of the aircraft and thus its service history? Obviously, it wouldn't do much for the aircraft once the Germans would have lost...
Started by Shtudmuffin on
, 16 posts
by 10 people.
Answer Snippets (Read the full thread at alternatehistory):
Aside from the fact that the fixed landing gear acted as air brakes and reduced from the fact that the fixed landing gear acted as air brakes and reduced the wieght of the aircraft both.
Widely embraced.
|
|
Hi,
does anyone know a good replacement for the standard landing gear? A unbreakable landing gear. I can't find anything for the MT.
Thanks,
Regards,
Wiebe
Started by Wiebe_nl on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at helifreak):
Nick I've been using Gorilla gear from a Protos500 and love it!
Minor mods for fitting,I actually put a spacer between frame and gear for canopy to....
Its been good for me so far.
Gorilla Landing Gear is said to be unbreakable.
|
|
In case I need to know in the am. How do I hand crank landing gear
Started by Canstacker on
, 9 posts
by 6 people.
Answer Snippets (Read the full thread at everest-owners):
Phew! I'm gettin' tired just thinkin' 'bout it!
Regards,
Cal the right front compartment... .
L, in that the landing gear has a 3:1 reduction gear housing that mounts between the motor revolution of the landing gear shaft.
|
