|
Alright guys, I was going to hold off on making these for a bit but I think the time is right after talking to quite a few of you. First up: control arm bushings:
Control Arm Bushings:
The only bushings we have for our Altimas are ES Maxima front arm ...
Started by Red Lion on
, 15 posts
by 7 people.
Answer Snippets (Read the full thread at nissanclub):
....
Time to start replacing worn out bushings with RLR performance ones
lets go!
sign me up how is the install process for the control arm bushings? and subframe as well while i'm at it...
Pretty much my baby is hitting the decade mark.
|
|
Introducing… Bitter Bushings (Cold Weather Skateboard Bushings)
Growing up in Canada, the separation of seasons has always been obvious. Certain activities are meant for certain times of the year. And skateboarding is one such activity. Shake off the ...
Started by bitter on
, 22 posts
by 12 people.
Answer Snippets (Read the full thread at skateboard-city):
Like, softer regular bushings ....
Nice idea, if i lived in a place cold enough to freeze my bushings, i would probably pick these up mang couldnt ya just use...
|
|
These harden bushings are for the trailing arms+lateral bushings. They are made by hardrace, and the procedure/process/rating/standard equivalent to NISM O Bushings.The bushing rated 75 hardness.
Also..washers are ready if anyone going for show this summer...
Started by b15azn on
, 14 posts
by 8 people.
Answer Snippets (Read the full thread at g20):
I will find out more soon I would be down for lateral ... .
But lateral bushings will need to double check again, I have two different sizes of lateral bushings either for a32/a33 or P11....
For P11 can use b15' trailing arm bushings.
|
Ask your Facebook Friends
|
I see a lot of people do the UUC ones. But from what I gather these bushings go right by the shifter. I have a bad bushings at the other end of my shifter. Does any one make good bushings for the ones at the outer end?
Started by sandmanws7 on
, 14 posts
by 8 people.
Answer Snippets (Read the full thread at cadillacforums):
I'd say it compliments the uuc bushings in that it does the same thing at the other bushings available that replace the....
Search it up is very marginal.
I think that NormV posted something about some Home Depot bushings he put on his.
|
|
I just received my set of Energy suspension front endlink bushings from Speed Inc(a sponsor to the left). I also ordered one set of swaybar bushings for the front stock bar. I ordered part # 9.8161G endlinks and #3.5210G front swaybar bushings. I went...
Started by Rolencode GTO on
, 12 posts
by 5 people.
Answer Snippets (Read the full thread at ls1gto):
You....
WHen a sway bar bushings per side.
You should have 4 little disc shaped bushings bar bushings on the stock front bar to help it even things out just a little.
Extention to get them from the top in the engine bay .
|
|
I just finished putting new poly bushings in my Fox's 'A' arms and noticed that with the new bushings, the control arm has a tighter fit in the k-member. It has been a while since I started this project and I cannot remember how the arm fit with the OEM...
Started by 7_Zero on
, 13 posts
by 4 people.
Answer Snippets (Read the full thread at corral):
You need to open up the k-member mouth, as its been crushed to the factory bushings inner sleeve for your replies!
4eyes, I was under the same impression but thought that since all 4 bushings were may be a little sketchy,you want ....
|
|
I need to replace my lower control arm bushings and was wondering if I should replace the whole control arm, or if it's worth just doing the bushings? Also going to replace the sway bar end links and bushings. Any thing else I should do while I'm in there...
Answer Snippets (Read the full thread at legacygt):
Let us know if we can swapped my bushings about....
On the endlinks the kartboys are great.
I would suggest replacing the LCA Bushings with the Whiteline LCA rear and Inner Bushings.
No need to replace the arms unless they are bent .
|
|
So I think I decided on a rear bar.. Either pedders or phadt which ever I can get a better deal at. I read that subframe bushings are a good 'bang for the buck' mod. Is this true? Why? I might just stick to the rear sway bar if the bushings aren't worth...
Started by Larz29 on
, 19 posts
by 15 people.
Answer Snippets (Read the full thread at camaro5):
Think of it like this, your....
Hit me up if you have any bushings.
Moves a lot due to very soft bushings which leads to a lot of bad things including unpredictable in the stock set up versus the Pfadt solid bushings and trailing arms.
|
|
Front sway bar bushings going to be swapping out my front sway bar bushings with some urethane one's. my question is can you get the bushings out without removing the sway bar and dropping the cross member? it looks like it would be a tight fit without...
Started by Svt5.0 on
, 12 posts
by 8 people.
Answer Snippets (Read the full thread at focaljet):
Re: front sway bar bushings Iv....
Re: front sway bar bushings It's weird, some people say you can and some it.
It took a stock-ish 05 gutted hatch.
Re: front sway bar bushings I managed to it on my 05 before cutting the sway bar out.
|
|
I have the corsport bushings and they feel great, have had them for 2 or three months and the cable hasnt snapped or anything. thumbs up for corsport
Started by senoauex on
, 13 posts
by 9 people.
Answer Snippets (Read the full thread at 8thcivic):
Also, I feel like the Corsport bushings made the shifting a little? And did you make....
How small were be very hard to remove too.
The shifting might loosen up a bit later on.
bushings made the shifting a little tighter.
|
