|
Ruger Single Six Cylinders Question
People are selling single six cylinders ( both 22/LR & 22 Magnum) on ebay. Are these cylinders interchangeable with any single six? :confused:
Started by rugerman07 on
, 12 posts
by 10 people.
Answer Snippets (Read the full thread at thehighroad):
I believe the convertible single-sixes have the last 3 numbers of the serial number engraved... .
Revolver cylinders often require a bit of hand fitting.
Maybe.
cylinders, and I've shot my single six with other cylinders without any issue.
|
|
I have a Ruger GP100 that usually leaves some lead behind after a session at the range-primarily in the cylinders-some worse than others but none real bad. What about trying to polish the cylinders? What I have on hand is some crocus cloth and Mother'...
Started by ColColt on
, 20 posts
by 9 people.
Answer Snippets (Read the full thread at gunloads):
I shoot those in the 44 Magnum with 10.5 gr of HS-6 behind a 260 gr boolit and get or 44 Magnum for whatever the reason....
I don't know the velocity need for pistols.
Magnum with 10.5 gr of HS-6 behind a 260 gr boolit and get no leading.
|
|
.22 magnum revolver I recently inherited an RG 66 revolver. It originally had 2 cylinders. One for 22 LR, the other for 22 magnum. I'm looking for the 22 magnum cylinder and am having trouble finding one. Any help would be appreciated.
Started by Dirtworks29 on
, 6 posts
by 5 people.
Answer Snippets (Read the full thread at texasguntalk):
Don't Tread....
I'm looking for the 22 magnumRe: .22 magnum revolver Originally Posted by Dirtworks29 I recently inherited an RG 66 revolver amendment supporter.
One for 22 LR, the other for 22 magnum.
It originally had 2 cylinders.
|
Ask your Facebook Friends
|
.22 magnum revolver I recently inherited an RG 66 revolver. It originally had 2 cylinders. One for 22 LR, the other for 22 magnum. I'm looking for the 22 magnum cylinder and am having trouble finding one. Any help would be appreciated.
Started by Dirtworks29 on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at texasguntalk):
Don't Tread....
I'm looking for the 22 magnumRe: .22 magnum revolver Originally Posted by Dirtworks29 I recently inherited an RG 66 revolver amendment supporter.
One for 22 LR, the other for 22 magnum.
It originally had 2 cylinders.
|
|
86 mariner magnum 150hp I have a 86 mariner magnum 150hp that is hard to start. If give it a little throttle it will start.My bigest problems is when you put it on the water it start terrible and the throttle is lazy.It take about 4 second before it will...
Started by Leonard Ray on
, 12 posts
by 3 people.
Answer Snippets (Read the full thread at iboats):
Re: 86 mariner magnum 150hp Did a compression check with a new guage and all cylinders whereRe: 86 mariner magnum 150hp Sounds like flooding or other fuel delivery problem.Check bulb and I understand."
Haines Hunter V17C Half....
|
|
First, please don't answer if you really don't know. AKA no Internet experts.
I heard this from an old guy (DOB 1931).
STOP! Before you answer. This is an old gun from when the first 22 magnum's came out.
He told me he has an 8 or 9 shot 22lr magnum revolver...
Started by Walklightly on
, 17 posts
by 14 people.
Answer Snippets (Read the full thread at thefiringline):
Some....
There are/have been several revolvers fitted with two cylinders to accomodate both rounds.
To begin, the 22 magnum(22WRM) case won't fit in a 22lr chamber and the 22lr will split if fired in a magnum chamber(if it fires at all).
|
|
350 Magnum Cracked block.. Question on options to repair. I have a 350 Magnum EFI engine with a cracked block.... This engine only had 8 hours on it. Does anyone know if it is possible to get a new engine block (not overbored) and use the Crank, Pistons...
Started by BadDay on
, 25 posts
by 8 people.
Answer Snippets (Read the full thread at iboats):
Does anyone know is replacement and not let it happen again... .
This engine only had 8 hours on it.
Originally Posted by BadDay I have a 350 Magnum EFI engine with a cracked block....
Question on options to repair.
Re: 350 Magnum Cracked block..
|
|
I like shooting my Model 629,,,
I just don't like paying for the ammo.
It's one of my guns I only shoot rarely,,,
Even then I limit myself to 4-5 cylinders of 5 rounds.
I was just on a website that was offering,,,
300 grain .44 Mag ammo for $31.95 for...
Started by aarondhgraham on
, 20 posts
by 13 people.
Answer Snippets (Read the full thread at thefiringline):
I went so far as to buy the Lee Classic Loader in .44 Magnum,,,
But that was around the time.
...and the REALLY pricey.
.300 Winchester Magnum...
.500 S&W...
Ammo in the following calibers...
|
|
Smith & Wesson 65-2 357 magnum
http://i1085.photobucket.com/albums/...323/SW65-2.jpg
I was at a local gun show this weekend looking for an Ak which I found when I came across this. It was being offered by a local shop that I'm well known in when I saw...
Started by chez323 on
, 13 posts
by 10 people.
Answer Snippets (Read the full thread at thehighroad):
I can see that the barrel is pinned, I am guessing that the cylinders recessed? All three.
|
|
Magnum 40 hp Troubles I have a Mariner Magnum 40 hp 4 cyl ser# 0G9441942 mod 40 ELHPTO that is running on three cylinders. I have 125 to 128 psi compression on all four cylinders. I have spark on all four plugs but the top cylinder does not affect the...
Started by papanuge on
, 1 posts
by 1 people.
Answer Snippets (Read the full thread at iboats):
|
