|
Hi,
My Ampeg BA115 has started blowing fuses as soon as i power on the amp.
I had been playing for around 20 minutes when all of a sudden I was greeted with a 'pop'. I opened the amp up to find the fuse had blown. I replaced it with a fast acting 3A 2...
Started by sonnet79 on
, 20 posts
by 8 people.
Answer Snippets (Read the full thread at talkbass):
Quote in question was shorting to something....
Quote the short.
Is it a tube amp? My power tubes would come loose and cause the fuse to blow.
Causing the short.
|
|
Hi my pc keeps blowing fuses could someone please tell me why this could be? could it of over heated?
Started by hackman2007 on
, 14 posts
by 1 people.
Answer Snippets (Read the full thread at maximumpc):
Wait a sec...blowing a fuse where? please state your computer specs and clarify what....
If the computer is running and the fuse blows and see if that circuit is labeled and what is on it.
Most likely there are to many things on that circuit .
|
|
I am constantly draining my battery in the course of a couple days. After an Amp test I narrowed it down to the Room Lamp Fuse in the engine bay.
I went through all fuses and the 2 relays in the drivers side kick panel (no change).
Unplugged ECU and also...
Started by way2slowtalon on
, 18 posts
by 6 people.
Answer Snippets (Read the full thread at dsmtuners):
*Behind Radio (including what looks when I pull Room Lamp fuse 0 amps....
Of 14hrs today unplugging every relay or harness known by me
*Drivers kickpanel: EVERY fuse imaginable, 2 relays, and right above it 4 relays and 1 10amp fuse.
|
Ask your Facebook Friends
|
I noticed the other thread got closed down, not sure for the exact reason. I know this was a pretty controversial thread, and there were some strong concerns about the audibility and the accuracy of when the fuses blow.
I am not here to rehash those points...
Started by Mister Pig on
, 15 posts
by 8 people.
Answer Snippets (Read the full thread at audiokarma):
So my comparison....
First I have friends that do.
On a whim I decided to drop in the 3 amp fuse into my amplifier to give it a listen to.
The liquid is non-conductive and meant to damp resonances within the fuse, according to the manufacturer.
|
|
I have a basically stock 2000 Firebird V6 (3.8 litre or 3800) with a manual transmission and about 92,000 miles. For months I have been trying to fix a check engine light. The code will go away if I clear the codes and swap the 20 amp fuse for the ENG...
Started by DOC-Z on
, 13 posts
by 7 people.
Answer Snippets (Read the full thread at thechicagogarage):
The PCM uses the....
I was thinking a 25 amp fuse, but I don't want to burn out the sensors through it into the engine.
Replace it with a 40 amp fuse you'll be good
let me see if I can find anything helpful in alldata any sort of suggestion.
|
|
Hello sarNie's!
Our wonderful Admin has decided that we will be holding a T-Shirt Design Contest for 2011. There are a few simple guidelines and good news with this!
Guidelines:
1. You must be a sarNie/Fuser.
2. All submissions are to be submitted Via...
Started by KhoOnxNouxWanxJai on
, 17 posts
by 10 people.
Answer Snippets (Read the full thread at asianfuse):
CURRENT FF: Proong Nee Aht Mai Mee Chan Torn in Between Shadow of Silence [GroupFF]
YOUTUBE: AIKODEN | BARGIEforum | ThaiLakornSub... .
Im hyped ..
Can't wait to see all the interesting designs hehe..
This is so cool!! thanks for the heads up tina. .
Omgahhh...
|
|
Rear number plate fuse Any ideas of fuse number and location
05 blob sti
ta
james
Started by JAMESWILSON on
, 4 posts
by 2 people.
Answer Snippets (Read the full thread at scoobycity):
Re: Rear number plate fuse....
Jeremy Clarkson..
Re: Rear number plate fuse Heres some diagrams from a bugeye dont know how differant".
Re: Rear number plate fuse Dont think it's got it's own fuse? I would say it would probably..
|
|
I am having much difficulty getting a rx. to provide sufficient range when installed in two of my recently built carbon reinforced models.
Both have fibreglass wings with carbon tow spar caps. Both have longitudinal runs of 50k carbon tow in the fuselage...
Started by Jimbello on
, 15 posts
by 8 people.
Answer Snippets (Read the full thread at rcgroups):
The antennas pop out of the side of the fuse just at the LE (only the end bits, the covered extensions are still inside the fuse) one goes above the wing, the other down below out OR wrap the lead around the fuse....
I had turned it off.
|
|
Hello,
I do have a monitor that should start when I reverse, so any ideas which color or number the reverse fuse is please?
Thank you.
Started by maanoo on
, 6 posts
by 3 people.
Answer Snippets (Read the full thread at driveaccord):
Also goes to the headliner.
Wire is light blue from the driver's fuse box to the rear.
Nvm, wrong year
**edited Reverse feed is switched after "hot when ignition on" fuse so tapping fuse won't help.
|
|
I have a Wells Gardner 25" K7191 and every time I power on the cabinet, the line fuse blows. Shortly after the monitor chassis fuse will blow. The isolation transformer is one that was purchased on Twisted Quarter. Input 120V AC output 120V AC 120 Watts...
Started by riddict on
, 9 posts
by 3 people.
Answer Snippets (Read the full thread at arcadecontrols):
You might also check that the fuse is fine if you power it up without the monitor....
That weird it blows the cabinet fuse if it is in fact the monitor is normally what's the "correct" way.
To dive into this dang monitor chassis.
|
