|
For the 68 Dart project we are Purchasing a Moser Dana 60 w. disc brakes. Mini Tub and spring relocation in progress, springs are CalTracs.
1. We will run DOT slicks so want the largest we can get in the space, is it possable to get 12" tire in this space...
Started by ycdart on
, 14 posts
by 8 people.
Answer Snippets (Read the full thread at forabodiesonly):
Thanx ycdart,I measured....
My 67 barracuda is mini tubbed with a stock length rear housing order.
Petty Blu I see your with axels is 51 5/8.Hope this helps .
Lots of help from Crackedback(Rob)when doing my rear mods.Thanks again Rob.
|
|
Hey guys im going to order a rear monday, my last option is if I should narrow it or not... and if so how much, ofcourse I love the look of the big lip!!! I would like to see some pics of your rear end narrowed, and how much it was narrowed without any...
Started by domestic disturbance on
, 20 posts
by 13 people.
Answer Snippets (Read the full thread at ls1tech):
If you narrowed....
Looks killer guessing I would need a 6.25" backspacing on my wheel, correct? or 4.75 backspace? Stock back spacing is 7.5".
My MWC 9" is narrow 2.25" on each side, my 17x11 torq thrusts are 5.5" backspaced.
|
|
BIGBODY NARROW REAR END ANYONE DONE IT? what would be the rear end axle to swap out of the bigbody cadillac to clear wheels in the rear. i have daytons on it now, no rub, i want to put my roadstars on the car, and the roadster offset is too far positive...
Started by lone star on
, 12 posts
by 5 people.
Answer Snippets (Read the full thread at layitlow):
I have daytons on it now, no rub, i want to put my roadstars....
Had to change the rear brake lines Originally Posted by lone star what would be the rear end axle to swap out of the bigbody cadillac to clear wheels in the rear.
|
Ask your Facebook Friends
|
Hey guys, looking to mini tub, narrow the rear axle and relocate the springs for max clearance. Also looking to move the axle rearward an inch or so.
With the spring relocation kit that allows different mounting points, am I able to move the axle rearward...
Started by 96bansheepilot on
, 19 posts
by 11 people.
Answer Snippets (Read the full thread at forabodiesonly):
You also get close to the Factory fuel....
My tires just touch the rear of the well ocaisionally when turning up a hill.
I amm sort of glad I didn go an inch .
I moved my rear bac 1/2 inch and moved the front lower well front 3/4.
|
|
Hey guys,
I had a thread months ago on billets, and got offtrack talking about narrowing the rear end. But that's really what needs to be talked about now.
So i want to maintain my stock leafs, and factory disc brakes with my 5/7 drop. I read online that...
Started by BGRAY on
, 15 posts
by 8 people.
Answer Snippets (Read the full thread at gmfullsize):
I don't know
I haven't done it yet ....
Ima call mine machine shop monday and see about shaving about 5mm off my rear wheels.
Wheelworksinc.com/
Then measure and narrow your rear end as much as you can (or just buy a Currie.
|
|
First I appreciate the help I get on here and no BS for asking questions that usually have been asked before. Here is my deal this time. I am doing a 200 rear tire conversion on my 04 softail and am collecting parts. I have been reading about what all...
Started by harley rancher on
, 8 posts
by 5 people.
Answer Snippets (Read the full thread at hdforums):
My 04 to my parts manual, you didn't get a 70 T off a 08, they only came with 66 T domestic, and 64 T Japan.
For example, are you going to need a newer swingarm? Wont need a newer swing arm .
Up getting.
|
|
Does anyone know of a shop in Dallas/Fort Worth that narrows rear ends? Been calling around and looking on line but seems like no one does it on 10 bolt gm. Can anyone help out with a name or number
Started by 1_bad_04 on
, 6 posts
by 6 people.
Answer Snippets (Read the full thread at gmfullsize):
Info in case i need it one of these days i wanna put 24s on my rear truck and maybe need to make fort wort its off of long and 35 when my friend got his axle shortened on his Envoy it was $500.
|
|
So I got my hands on a Dana 44 rear from a guy who said it was out of a 86 CJ. After I get it home and start to tear it done I started to get the feeling it was a narrow track and not a wide track like was used on 86's. After read some posts here I have...
Started by gerth21 on
, 4 posts
by 3 people.
Answer Snippets (Read the full thread at jeepforum):
Are significantly stronger in the D44
my $.02.
|
|
Narrowed 8 3/4 rear out of my 72 Duster. has big bolt axles. Can sell with or w/o gears. Has 489 355 sure grip in it. Car has mini tub done and had leafs brought in with offset kit to give you idea of how it would fit. Brakes are in great condition (1...
Started by 4fortyDemon on
, 9 posts
by 3 people.
Answer Snippets (Read the full thread at forabodiesonly):
Well- once I get checked out with the doctors on my health, I'm sure that something bigblock.
|
|
Check this pic out...could be my rare KTRE 12 bolt but would like to think all the designs are similar. I've heard of problems narrowing past 2" with the e-brake setup but haven't heard of this. I've got 1.72" at the bleeder before it hits the mounting...
Started by alan2000T/A on
, 9 posts
by 4 people.
Answer Snippets (Read the full thread at ls1tech):
I just got my own caliper brackets in the mail today and mocked them to mount them a little different....
Th350~built rear w/3.42's~dropped 4"
99 regal gse - t66 t3t04e turbonetics~spearco a2a ic~zzp trans either compared to our LT1 brakes.
|
