|
I have a Windows server 2003 R2 SP2 that has 2 virtual NICs. One NIC is DMZ and the second NIC is BACKUP. I am able to ping everything on the DMZ network without issue. I am able to ping everything on the BACKUP network if the BACKUP NIC is DISABLED. ...
Answer Snippets (Read the full thread at microsoft):
If I use tracert on....
Using tracert on the gateway gives me a time out.
Use tracert command to ensure routing is working perfectly.
Want to ping gateway 10.212.125.1 but failed
Please elaborate more, like other server's route table.
|
|
Good day!
I'm trying to get the default gateway, using the destination 0.0.0.0
i used this command: netstat -rn | grep 0.0.0.0
and it returns this list:
Destination - Gateway - Genmask - Flags - MSS - Window - irtt - Iface 10.9.9.17 - 0.0.0.0 - 255.25...
Started by Suezy on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at serverfault):
Ip route show default should do the trick for the default gateway, or you can use ip route get < default | awk '/default/ {print $3})' ping -c 1 $DEFAULT_ROUTE
Should do what you want..
|
|
Hello,
Please see attached diagram first.
Vlan 1 , 10 , 20 PCs can ping each others, but cannot ping 200.1.1.2. I want those PCs can reach 222.0.0.2 server.
Please help !
Started by Wilson Kwok on
, 9 posts
by 4 people.
Answer Snippets (Read the full thread at cisco):
This behaviour can be seen when the server is missing a gateway, all hosts can reach the Router 222.0.0.1 but there is no return packet from....
Hi,
Make sure the Server Gateway address is set to 222.0.0.1 (which is the router local interface).
|
Ask your Facebook Friends
|
My windows machine has two network cards, both have default gateways. How does windows determine which gateway should it access when sending a packet to a remote endpoint?
More precisely, here's my routing table:
Active Routes: Network Destination Netmask...
Started by rouli on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at serverfault):
Your ping to 10.0.0.180 goes out to 10.0.0.191 a default gateway for each interface, TCP/IP by default automatically calculates an interface metric route in the routing table for the....
Default gateway the TCP/IP protocol was using.
|
|
I was using ver 1.2.3, and then upgraded to 2.0.1 this weekend. I first noticed a problem when I attempted to check the auto-update url in the Firmware menu, and then also the packages were not showing up and it gave the error that it couldn't contact...
Started by pfnoober on
, 4 posts
by 3 people.
Answer Snippets (Read the full thread at pfsense):
Quote client have static configuration of default....
If you remove the IP address from LAN interface then your LAN clients will need to use the pfSense WAN IP address as default gateway.
Client have static configuration of default gateway.
|
|
Hi,
I have two applications a client and a server running on my local machine and want to monitor their network traffic through NetMon.
One solution is to route the local traffic through the default gateway. However, I never got this working. It should...
Started by Alex on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at serverfault):
255.255.255.255 87.198.54.1 87.198.54.9 1
I still wouldn't see a ping in the network monitor.
|
|
Hi
First of all I cannot setup pfsense to do load balncing or failover. I did all as was written in the tutorial but somehow speedtest doesnt show improvement, as well as torrents.
If I unplug wan or opt1 I loose the connection to pfsense. In any case...
Started by hsoldo on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at pfsense):
All you WAN and....
I would use 3 separate subnet for each WAN and LAN .
This is usually not a good idea.
All you WAN and LAN are in the same subnet .
Starting with the basic.
|
|
Hello All.
I have follow issue:
MG 450, connected to 2 switch (Master and Backup) using 2 ETH port (10/5 and 10/6).
All switch was powered off due electrical problem. When switch goes up again, media gateway can't send packet to default gateway but only...
Started by nibbio on
, 16 posts
by 5 people.
Answer Snippets (Read the full thread at avayausers):
And does it stop pinging....
After reboot media gateway, I can ping default gateway address.
Reboot media gateway, I can ping default gateway address.
|
|
We have xp workstations connected onto a small business server acting as active directory/isa firewall/proxy (no dhcp). Is there a reason that after installing a 2nd firewall on the network (same subnet etc), that changing the default gateway on the workstations...
Started by Gary B2312321321 on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at serverfault):
It's possible that there's a group policy setting be ... .
You could also consider a better edge firewall/router like the Juniper (branch) SRX line or Cisco 877 .
Actually removing ISA isn't needed.
Short answer is that just flipping DHCP should be enough .
|
|
Dear friends;
There are two network cards: re0 and wlan0 . I just want to set up my server to be a wireless rourer with subnet 192.168.1.1/24 based on wlan0 also, so I add following words in /etc/rc.conf :
Code: ifconfig_wlan0="inet 192.168.1.1 netmask...
Started by xwwu on
, 17 posts
by 4 people.
Answer Snippets (Read the full thread at freebsd):
Ifconfig_re0="inet 192.168.0.6 netmask 255.255.255.0" defaultrouter="192.168.0.1" gateway_enable="YES be a gross error because you can't have two otherwise identical routes that have different gateway 192.168.1.0/24 192.168.1.1"
but still....
|
