Discussions about rear brakes

FS: 96 ITR Front & Rear Disc Brakes + Rear Control Arms As the title says, I'm selling the following from a 1996 JDM ITR: -front knuckles and brakes -rear trailing arms, lower control arms, and brakes $100 picked up OR $50 if you pick up by tomorrow(Wed night) OR even less if you bring me a rear left outer... Started by LauraB on Wednesday, January 18, 2012, 11 posts by 7 people.   Read the full thread at hybrids Discuss this with your friends on Facebook Answer Snippets (Read the full thread at hybrids): If they fit I'll pick: 44300-S5A-008/44300-.... Front / rear brakes are available from fastbrakes.com or upgrade to ITR calipers/Prelude VTEC rotors of rear LCAs? I need the style for the forked rear shocks on a stock 95 GSR.

BRAKES : INSTANT BIG BRAKES 4 P11/Y11/B15/U13 & R33 F + REAR NISSAN 4 PISTON & 2 PISTON CALIPERS with ROTORS APPLICATION - P11 / Y11 / B15/ N15/ A31/ A32/ A33/ C32/ C33/ C34/ C35 ETC CALIPER - NISSAN 4 PISTON ( R32 or 300ZX will confirm) ROTOR (AFTERMARKET) - ORIGINAL 4 & 5 HOLE (SLOTTED) (NO - REDRILLED ROTORS... Started by on Sunday, January 29, 2012, 30 posts   Read the full thread at trinituner Discuss this with your friends on Facebook Answer Snippets (Read the full thread at trinituner): Thanks brother Bumps bumps Bumps bumps bumps Bumps. Jason - 494-4975 brake setup is 300ZX brakes with slotted rotors BTW. Bumps Bumps Bumps First brake setup is 300ZX brakes with slotted rotors BTW.

No rear brakes The rear brakes on my 70 AMX aren't working. All new system and bled put it in drive on jackstands and the brakes won't even hold that. Any ideas? Started by amxdreamer on Wednesday, June 29, 2011, 15 posts by 6 people.   Read the full thread at amccars Discuss this with your friends on Facebook Answer Snippets (Read the full thread at amccars): Well, tonight.... Maybe my rear brake switch stuff. Maybe my rear brake switch is shot they are difficult to turn by hand and they still won`t stop my torque monster . To turn by hand and they still won`t stop my torque monster .

Installing rear disk brakes?? So i was wondering how hard is it to install rear disk brakes on my 98 highline? Started by Goalie123 on Monday, February 13, 2012, 12 posts by 5 people.   Read the full thread at neons Discuss this with your friends on Facebook Answer Snippets (Read the full thread at neons): I just replaced the entire rear knuckle assembly, attached the brake lines, and ran the emergency brake cables. My old '02.

R90/6 rear brakes question I have never had the rear brakes replaced and have over 120,000 on the bike. How common is this? Started by rbryson on Saturday, February 11, 2012, 12 posts by 8 people.   Read the full thread at bmwmoa Discuss this with your friends on Facebook Answer Snippets (Read the full thread at bmwmoa): You just like in the.... Tremendous difference in the rear brake. Nothing, the cam in the brake drum will run out of stroke/travel and you will have no rear brake on the rear shoes, I replaced them with EBC shoes.

DIY w/pics: (56k+) Rear Hub Assembly and bearing (rear disc brakes) Unless I missed it, I don't think I saw any DIY sticky for replacing the Si's rear hub assembly (disc brake). So here goes. After reading this completely, you might find it worthwhile to spray whatever bolts you can with PB Blaster the day before. This... Started by bsc70808cc on Monday, January 16, 2012, 12 posts by 9 people.   Read the full thread at 8thcivic Discuss this with your friends on Facebook Answer Snippets (Read the full thread at 8thcivic): THANKS Just what I was looking for.

REAR Dana 60 with disc brakes with 4.10's 30 spline I have a REAR Dana 60 with disc brakes with 4.10's(I was told, but never checked) 30 spline REAR Dana 60(66" to 67" WMS to WMS) with disc brakes with 4.10's(I was told, but never checked) 30 spline $350.00 in SF bay area, CA Started by go4wheling65 on Thursday, September 01, 2011, 11 posts by 6 people.   Read the full thread at pirate4x4 Discuss this with your friends on Facebook Answer Snippets (Read the full thread at pirate4x4): Btt Can you shoot me a text or call at 707-696-0581 I'm located in Santa Rosa . Of the brakes is locked up.

Replacing rear wheel hub/bearing assembly w/drum brakes. Replacing rear wheel hub/bearing assembly w/drum brakes. Today I will be replacing my rear wheel bearings by replacing the hub assembly (as opposed to just the bearings). I think its pretty straight-forward, but was wondering if anyone can point me to... Started by pmiller613 on Saturday, January 28, 2012, 12 posts by 6 people.   Read the full thread at focusfanatics Discuss this with your friends on Facebook Answer Snippets (Read the full thread at focusfanatics): Is that.... RA doesn't seem to have any for drum brakes. Get the photo to load but go here and look at the rear brake illustration http://www.fordparts.com going to a local parts store for hubs.

Strange brakes, suspension, and rear end parts Strange brakes, suspension, and rear end parts PM me your needs and/or part numbers. No warranty expressed or implied. Started by DaTurboSix on Tuesday, March 22, 2011, 15 posts by 8 people.   Read the full thread at chitownracing Discuss this with your friends on Facebook Answer Snippets (Read the full thread at chitownracing): Need brakes!!!! Fuck you pay me Originally Posted by aquick68 need brakes!!!! get.... No warranty expressed or implied. Stuff? and brake stuff? 89 notch? PMs set peeps. Proper Planning Prevents Piss Poor Performance what kind of susp .

F.S REAR DISC BRAKES: BJ + BH + CS LANCER + EK/EG ABS CIVIC CS LANCER REAR DISC BRAKES 4*100 Hand brakes cables - Yes Condition - VERY VERY VERY GOOD Price - $2500 Pics to follow CS LANCER REAR DISC BRAKES 4*114.3 Hand brakes cables - Yes ABS Sensor ( UNCUT ) - Yes Brake Pads - LIKE NEW Condition - LIKE NEW Price... Started by on Sunday, September 04, 2011, 30 posts   Read the full thread at trinituner Discuss this with your friends on Facebook Answer Snippets (Read the full thread at trinituner): ADDED Bumps BJ & BH 4 HOLE REAR DISC BRAKES ADDED Bumps Bumps Bumps Bumps Bumps Bumps Bumps Bumps.