|
Exactly every 600 seconds (10 minutes) my 2wire 2701HG-B has latency go from around 15ms to between 400ms and 800ms. This lasts for between 108 seconds and 113 seconds averaging 110 seconds.
This is true for both wired and wireless. I've tried it on multiple...
Started by Paul Tarjan on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at serverfault):
The upload time was....
I had a machine that was plugged into the network, that every 10 minutes would attempt to send a huge email .
Have you tried applying the latest firmware updates?
Well, I feel very embarrassed posting this, but it might help others .
|
|
I currently have one Linksys wireless router attached to a cable modem. The router is 192.168.1.1 and is a DHCP server. The router itself gets a dynamic IP from the cable ISP... pretty standard stuff.
What I'd like to do is connect a second router (by...
Started by JoelFan on
, 5 posts
by 5 people.
Answer Snippets (Read the full thread at superuser):
1) Setup the second "router on the second....
Perhaps I can clarify some of the other answers.
You will simplify this.
Connect the second Linksys router (Router2) to the main router (Router1).
Yes, you can do so.
|
|
I have Verizon DSL service that came with a westell 7500 wireless router, but the wireless does not cover a big enough area.
I also own a linksys wireless router which I would like to place about 75 feet away, up one floor, in order to have complete coverage...
Started by EJB on
, 4 posts
by 4 people.
Answer Snippets (Read the full thread at serverfault):
Go get a second wireless router, and configure it as follows:
Plug one of your Linksys router as a secondary router running in Access Point mode, though I think you might have an whistles, too, on a real access....
Access point.
|
Ask your Facebook Friends
|
Does anyone know if I can purchase a second power supply that goes in a Cisco 3825 router, or is there a separate unit I get for this?
Right now it just the single power supply, and I want to get what I need to have it read for standard A/B power setup...
Started by Kyle Brandt on
, 4 posts
by 4 people.
Answer Snippets (Read the full thread at serverfault):
I've used this solution on devices that I only found out too late didn't have dual power supplies. .
Products/family/index.cfm?id=14
I've just moved you from one SPOF (the router PSU) to two SPOFs router.
|
|
Recently upgraded to a Technicolour TG582n wireless router. Is it possible to add a second router to a wired network to get a wireless signal at other end of the house? If so what router would you recommend?
Started by tjg13 on
, 16 posts
by 11 people.
Answer Snippets (Read the full thread at plus):
Of the house where I wish to locate the second router, this solution would be ideal if I can set it up or would it be possible to use any make of router as the second router?Doesn't need to be a router - it just....
|
|
If you are losing connection to the server, either timing out or seeing people running into walls, within a few seconds of joining, then you are probably experiencing a common problem with a certain brand of routers.
This is caused by a faulty rule on...
Started by Morello on
, 20 posts
by 14 people.
Answer Snippets (Read the full thread at tripwireinteractive):
Please see to this issue reinstalling network drivers,....
I use Thomson ST780i wireless router.
You very much! having this problem with westell 6100 rev C I am using a 'THOMSON TG585 v7' router straightforward and everything else freezed).
|
|
Hey guys. Haven't been at CEF in a while.
I currently use a crappy modem/router 'Netcomm NB6Plus4'.
It isn't the version which supports wifi, so i recieved a Netgear wireless router from a family member who didn't need it.
I'd like to connect my 2 PC'...
Started by iTz SWAT on
, 10 posts
by 4 people.
Answer Snippets (Read the full thread at cheatengine):
First connect one computer to the wifi router (preferably cabled in case you mess up the wifi is not the same as your other router (perhaps also a slightly different subnet like 192.168.1.1 instead of 192.168.0.1)
Then connect an ethernet....
|
|
Hello i have added a second router to my network in a second building at my location.
my dsl comes in and into my first router which is the dhcp server for the network in both buildings.
the ip address of the first router is 192.168.1.1 and works fine...
Started by rlowery98 on
, 6 posts
by 3 people.
Answer Snippets (Read the full thread at techguy):
I don't have a specific answer, but I'm wondering why you used another router instead of a switch you for the reply but it is kind of a unique situation
router 1 is a residence and router 2 and took out the first router and....
|
|
I have a Linksys M10 (Valet) router as my primary router. I have an old Linksys WRT54G Router that I wanted to use as a repeater/second router. Is there any way to use this as a second router without connecting the two via Ethernet, nor putting custom...
Started by mef101 on
, 5 posts
by 3 people.
Answer Snippets (Read the full thread at microsoft):
Check with your Router....
Setup security you you want it and you have effectively expanded you wireless Router into a Range-Boosting Wi-Fi Repeater http://lifehacker.com/5563196/turn-your-old-router that.
router and there you go.
|
|
Hey all,
I've received a second router from a friend of mine and I was wondering what can I do with it? It is a Linksys WRT120N, if that helps with anything.
Started by Shadius on
, 10 posts
by 4 people.
Answer Snippets (Read the full thread at ubuntuforums):
Much....
|
