|
Hello
I have a one foot pellet pipe where the inside tube diameter is 1/16” less than 3 inches. It goes onto the Pelpro stove vent pipe just fine. So to do it right I bought a pellet stove appliance adapter by duravent. Not the Duravent pro line. This...
Answer Snippets (Read the full thread at hearth):
Thanks Hello
There....
ProductId=3134815&Ntt=pellet+stove+appliance+adapter&pl=1¤tURL;=/pl__0__s?Ntt=pellet+stove+appliance+adapter&facetInfo;= I used a standard 2 foot straight piece of Simpson pellet Duravent I will consider that.
|
|
I suspect the QT3 hivemind has some good power tool and/or appliance advice. May this thread serve as hub for queries to that node of knowledge...
I'll start with two:
1. My f'ing dishwasher just broke. It's a Bosch that was in the house when I moved ...
Started by Clay on
, 30 posts
by 16 people.
Answer Snippets (Read the full thread at quartertothree):
May this thread serve as hub for queries on the tap, the flow is so low and the distance from the heater so great, you could run it for ten.
Hivemind has some good power tool and/or appliance advice.
|
|
Home Appliance Tech. Dishwasher ??
I have a Kenmore Dishwasher Part No. 665.16579200 The heater element is shot, and no longer made. Substitute includes a new board. Also it says, new item is not intended to heat water, merely keep the water warm. Can...
Started by madhat on
, 8 posts
by 4 people.
Answer Snippets (Read the full thread at hvac-talk):
Heading....
Have never replaced an element, but if the standoffs are the same height and the gaskets don't leak and the element is the same physical size and watt rating, why would the control board need replacing? Maybe I'm missing something basic here.. .
|
Ask your Facebook Friends
|
My CPAP works pretty well, but not great, for me (mild apnea + insomnia), but I travel often and a dental appliance would be so much simpler and may work better (by not awakening me late at night). So I tried a dental appliance.
In short: big, expensive...
Started by Ugerth on
, 6 posts
by 6 people.
Answer Snippets (Read the full thread at topix):
The....
Its all they know.
Most sleep doctors are CPAP peddlers.
In short: big, expensive mistake.
So I tried a dental appliance.
Often and a dental appliance would be so much simpler and may work better (by not awakening me late at night).
|
|
Hi!
I bought a Smoothie Maker for $79 before Christmas from Innovations and to be honest it worked very well, but the motor has burnt out (I can return it for a refund so that's OK). But they are Out of Stock and no idea when more will come in.
So what...
Started by AussieGuy64 on
, 5 posts
by 4 people.
Answer Snippets (Read the full thread at bestrecipes):
I'm not surprised the motor burnt out if your smoothies are too thick to pour out of a blender!
I think you should be looking for a industrial-strength blender, food processor or possibly stick blender (although you'd likely burn the motor out of that... .
|
|
Hello, I wonder if anyone can help? I have a fairly large house, combi-boiler feeding about 10 radiators, two showers, two bathrooms. Rarely are all the radiators/showers.baths on at the same time - EVER.
We have to fire the radiators up in order to '...
Started by Loiner_of_Leeds on
, 20 posts
by 2 people.
Answer Snippets (Read the full thread at theanswerbank):
Just let the ....
All the combis I've ever had (gas and oil) let you open a tap
Appliance Type C12 C32
Appliance Category CAT II 2H 3P
Heat Input C/H & DHW (Gross)
Max Min
kW 34.3 problem...
Takes precedence over CH in most systems.
|
|
Feedback welcome...
Appliance repair hazards
The main hazards in appliance repairs are summarized. There are always
others that have the potential to occur too.
==Common risks==
Some risks are common to all mains appliances:
* shock if plugged ...
Started by meow2222@care2.com on
, 19 posts
by 12 people.
Answer Snippets (Read the full thread at omgili):
There are always
others
* door misalignment
....
The main hazards in appliance repairs are summarized.
Version 2....
Of niggles:
- CRTs implode, not explode
- "Propped appliance can fall on child or pet" is not unique for the suggestions.
|
|
On Tue, 03 Nov 2009 00:58:06 -0600, David H <david@invalid.com
I'm CPAP-less, and it doesn't just _feel_ ok, the sleep study numbers
confirmed that is _is_ ok!
I promised to report back on the followup sleep study results from the
TAP-3 (Thornton...
Started by David H on
, 6 posts
by 3 people.
Answer Snippets (Read the full thread at omgili):
Moving the jaw....
* An oral appliance will only help those who have OSA of the
tongue.
Can't stress this enough.
Too many
people assume success based on anecdotal evidence, when in fact all that has is SO important .
With this appliance.
|
|
I received my TAP 3 Elite about 5 weeks ago and thought I’d share my experience thus far in case anyone has any feedback or is interested. I have the smaller hook (more advancement) installed and have it adjusted about ¾ of the way (i.e. only a couple...
Started by fingerbreaker on
, 9 posts
by 6 people.
Answer Snippets (Read the full thread at apneasupport):
However....
In my case, the intention is to use the appliance for plane flights and possibly of the CPAP, and I am reluctant to give that up! Maybe if I sleep well with just the appliance while camping, I will change my mind.
Dentist has to say.
|
|
So I got the 7.2cf GE freezer from home depot and I just got it mostly put together. I have to add a few more beer lines and she'll be all done. Everything is pretty much the same as everyone else's so I think I will just talk about the little tweeks ...
Started by BullGator on
, 10 posts
by 4 people.
Answer Snippets (Read the full thread at homebrewtalk):
First coat of white appliance paint after one coat of primer.
Here is the collar all drilled out.
|
