|
Welding site, tutorials + more
Just found site similar to this, some handy tutorials & guides :welder:
Scroll down to find indexes in the left margin - MIg / TIG / Stick / Tips / Projects ... looks like lots of good info.
[URL="http://www.weldingtipsandtricks...
Started by Nomad on
, 6 posts
by 5 people.
Answer Snippets (Read the full thread at mig-welding):
You in the direction of a welding forum with almost double the [I][B]total[/B][/I] number of members are mandatory to keep membership
Welding tricks and tips is old news to many of us here but is a useful resource.
|
|
Many New Posts are dealing with the how to do it subjects.
So, if it's permitted, I'm putting in this link for those who want/need a tutorial set that can be done at home.
If it's not permitted - then just ignore this!
http://www.thewelderslens.com/page...
Started by DannyC on
, 5 posts
by 4 people.
Answer Snippets (Read the full thread at weldingweb):
Here is a good one.
Good stuff.
Of this forum could define a structure of tutorials/welding info which could be
a referenceCheck out Jody's videos over at welding tips and tricks.
|
|
Posted 30 January 2012 - 02:07 PM
Hey guys! As I promised last time I created tutorial about pattern welded spearheads. This is how I see it and it is one of many ways to do it. Spearhead was forged on charcoal. Based on findings from Scandinavia but ...
Started by Lukasz on
, 18 posts
by 17 people.
Answer Snippets (Read the full thread at dfoggknives):
- 07:33 AM
I'd say that is wonderful work !
really like how you set up the weld for the stub tang this my friend, - the way you weld the socket, is like the way patternwelded gunbarrel is made i think.
|
Ask your Facebook Friends
|
Help please, clarke 100e mk2 mig
hi ive got a mission of bodywork to do on my landrover discovery and chassis and im newish to welding im fine with learning and got time to practice but would this welder be any good to weld up to 2mm/2.5mm thick at most...
Started by FAAace09 on
, 9 posts
by 7 people.
Answer Snippets (Read the full thread at mig-welding):
Go through the welding tutorials on here, read up around the subject too, so you mk2 welder, i no its ok for my 1.2mm bodywork welding, but i need to weld some chassis plates on this one as need....
On the actual landy itself.
|
|
So today I decided to tackle the front fender and rear section (this is a late model Formichino). In the rear section I just had to fill in all of the license plate holes. Since this is a USA bike it will get a small motorcycle plate and there would be...
Started by PSchack on
, 24 posts
by 7 people.
Answer Snippets (Read the full thread at formichino):
I had to grind almost all....
Now I finished the weld with the 3" air sander and a 3.
I then grind back to the inside weld from the outside and weld up the remainder of the hole.
On both sides and filled the hole from the inside first .
|
|
Anyone know of any welding courses or similar that can be done in NSW. Im not interested in making a career out of it. I just want to know how to do it so I can do more DIY projects. I realise there are a variety of welding methods but im really just ...
Started by Sweenz on
, 18 posts
by 9 people.
Answer Snippets (Read the full thread at nissansilvia):
|
|
Hi everyone, just wondering if anyone here has used ox-acet. for welding body panels. I know it can be done , kinda looking for somebody to say "hell yeah i did it". I already have a torch set and dont want to buy a wire welder just for one panel. i've...
Started by ratfreak8871 on
, 11 posts
by 9 people.
Answer Snippets (Read the full thread at 67-72chevytrucks):
It isn't too bad most....
Gas welding has the same weld workability as tig, so you can hammerThere are people that have done it years ago but I would find someone with a mig to weld crushed in lol.
To much heat and way to large a tip.
|
|
Hello to all,
I just want to thank Pumptech again, as hes the one who gave me tips and advice on making these when I was new to the scene. After some time with trial and error and several attempts, this is the way Ive decided to do them. Though in time...
Started by Jigglepin on
, 15 posts
by 5 people.
Answer Snippets (Read the full thread at scale4x4rc):
I started by modifying the servo horn gear (this servo has seen better days, unfortunately its gone through all my other attempts ) I made a slit all the way just before I hit the casing, this is what will hold the screw drive so it turns with the servo... .
|
|
How do you go about welding thick metal say 2/3mm to 1mm sheet with out blowing holes through the sheet, thanks for help
i dont wana sound thick but say your overlap welding 1mm sheet to 1mm sheet, like a car floor etc, does that make you weld a 2mm weld...
Started by FAAace09 on
, 10 posts
by 6 people.
Answer Snippets (Read the full thread at mig-welding):
To 1mm lap welds when i first started welding, i am only doing butt welds now>
>Overlap Weld]25863[/ATTACH] nice 1 all well wozzzahhh what are you suggesting on welding power to weld 2mm platesKeep your....
|
|
Butt welding patches in jaguar floor question Hi , i am collecting info and tools etc to soon start the repair of my jaguar xjs floor. The floor is of approx 0.8 or 0.9mm sheet metal and i have cut the rusted metal out and am looking into making some...
Started by 540itouring on
, 9 posts
by 6 people.
Answer Snippets (Read the full thread at mig-welding):
Trying to butt weld something like 0.8 or 0.9 mm - to the other side of the ....
I've got some of the tiny clamps you mention, and this is one of their limitations .
It was something strength or safety critical which called for butt welding.
|
