|
Trying to understand a few specific aspects and limitations of CNC router
Why is it that CNC routers are all ( most? ) much less precise than
even economical milling/machining centers ??
what exactly is to be expected from a high end cnc router as far...
Started by JinMTVT on
, 12 posts
by 5 people.
Answer Snippets (Read the full thread at cnczone):
Be more of hybrid with gantry milling
i would still like to understand why there are NO cnc routers to understand why there are NO cnc routers of any kind , on any commercial pages i've found so far thoughts are that a CNC router....
|
|
I found this neat video showing a CNC mill set up with a rotory head slowly spinning a crankshaft while it milled the main & rod bearing journals.
It's for a model of a Boxer 6 cylinder engine.
It's kind of fun to watch what can be done if you have the...
Started by OTTO-Sawyer on
, 5 posts
by 4 people.
Answer Snippets (Read the full thread at smokstak):
Add some steeper drivers, power in this way with an endmill leads to a ... .
Mach3 is a cheap software that turns a pc with parallel printer port into a cnc step/direction controller.
That is hobby grade cnc equipment.
On the counterweights.
|
|
I have designed several dies in SolidWorks and need to find a CNC toolmaking shop that can produce from my 3d models.
All the diemakers that I know of are old-school - they need two months to make anything and do their work with hand-fed milling machines...
Started by PhoenixMetal on
, 12 posts
by 6 people.
Answer Snippets (Read the full thread at cnczone):
But I just have more faith in CNC processes to produce to the shop,
Thats what I do, speak....
That the part was being made via CNC directly from my models, it would give me much more confidence in my I know that experience is everything...
|
Ask your Facebook Friends
|
So after carefull searching, and shopping for a cnc mill i decided to build my own. I have been designing the components since October in Solid Works. I converted two machines to cnc before, and i feel with my machining experience i can construct a Mill...
Started by cncgabe on
, 12 posts
by 6 people.
Answer Snippets (Read the full thread at cnczone):
Should be done in about looks a bit narrow the table well vibrate look at the Hardinge Vmc base
My First CNC, own design.
Camming up the center drill, drill, tap.
Will post pictures later.
End mills.
|
|
Carful Industry Co., Ltd. was found in 2002, adhering to the spirit of "professional, high-quality, efficient, honest "and "quality assurance, reasonable prices, prompt delivery, and service is the first" for the principle, after recent years of exertion...
Started by carful on
, 2 posts
by 1 people.
Answer Snippets (Read the full thread at cnczone):
Carful Co., Ltd
tel:86-0755-27150460
fax:86-0755-27658255
email:zx@carful.net
msn:alicesdsd@msn.cn
skype:alice-zhang3
contact person:alice.
|
|
I have a run of aluminum rods I need machined- simple parts, holes bored into the sides of the rods perpendicular to the axis - anywhere from 3/4" to 1/2 inch in diameter rod, around 9 inches long - bores are either 1/4" or 3/8 diameter. Most likely I...
Started by nadsab on
, 5 posts
by 4 people.
Answer Snippets (Read the full thread at cnczone):
Nadsab
Around 4/5 times the cost of machining ....
Originally Posted by underthetire Traditional machining without a doubt...
EDM is good for small holes, very hard materials, and complex shapes .
Traditional machining without a doubt.
|
|
What to do??? I am in the market to purchase a new cnc router (next year) and wanted some advice on which machine is the best and which machine to stay away from and why. Any help would be great.
Carlton
Started by BeachCues on
, 15 posts
by 7 people.
Answer Snippets (Read the full thread at azbilliards):
He is the ....
Second, you obviously have access to some type of machining center which is vital imo, to building and the lazy are hugely taken advantage of when it comes to cnc routers
hope this helps I agree, why waste our at all.
|
|
CNC knee mill people,
I am looking at buying a mid/late-1990's DYNA EM3116 CNC Knee Mill, 3 Axis with Dyna 4M PC-III Control. Anyone have any knowledge or experience with these machines? What are the controls like for programming on these machines? I ...
Started by shoptalk00 on
, 12 posts
by 2 people.
Answer Snippets (Read the full thread at cnczone):
I have some ideas and designs I would like to market some day... .
If you could add an encoder and precise speed control with a daytime job and have a small machining and welding shop at my house.
Full size vertical machining centers.
|
|
OK guys. In a few threads on the metalworking forum the idea of a CNC has been raised a number of times and most recently, a few people have asked if someone could run an "introductory course".
I'll pull together some of the relevant posts here and let...
Started by jhovel on
, 15 posts
by 10 people.
Answer Snippets (Read the full thread at woodworkforums):
Over to Hartyrodm
...BT I'm not sure if you....
Covering that sort of quiestions while
I think a thread on CNC classes at the center of the universe, would be a great idea...
Modifying an industrial CNC machining centre? etc....
|
|
Since it's 06/02, I thought today would be perfect to start this thread. IMO, This is the most cost-effective and capable lathe for the buck. It should be even more capable after CNC conversion.
http://www.grizzly.com/products/10-x...al-Lathe/G0602
G0...
Started by Crevice Reamer on
, 12 posts
by 4 people.
Answer Snippets (Read the full thread at cnczone):
The Pump relay will control an outlet on the other side of HMC into which pump will plug:
CNC.
|
