|
I am working on a project where I produce an aluminium extrusion cutting list.
The aluminium extrusions come in lengths of 5m.
I have a list of smaller lengths that need to be cut from the 5m lengths of aluminium extrusions.
The smaller lengths need to...
Started by Stacey Richards on
, 7 posts
by 7 people.
Answer Snippets (Read the full thread at stackoverflow):
Place the lengths to cut in a random order as a Cutting Stock problem, as....
Take a look at this Wikipedia article for more information: The Cutting algorithm ' (which would go something like this)...
Sounds like a Greedy Algorithm.
|
|
Hi Ladies and Gents
I'm new on the forum here, but have been researching this topic on the site for the last few months.
I have a f800st 2008. 24,000km (15,000miles). I bought the bike second hand from a classified ad about 3 months ago. The guy didn'...
Started by dylanharbour on
, 16 posts
by 10 people.
Answer Snippets (Read the full thread at f800riders):
It doesn't cut out, just to also buy another fuel pump if it....
I recall a few threads about heat related fuel pump cut hot outside, like above 90F and I chop the throttle after a long cruise.
It was the controller or the fuel pump itself.
|
|
To get large file from one place to another what is faster cutting or copying a file ? What factors can influence the result?
I've heard it matters if they are on the same drive and the speed of the drive, but don't know for sure.
Started by Lilitu88 on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at superuser):
On different disks, Copying, by virtue of cutting would.
If it's across partition disk, cutting, by a considerable margin.
It will be faster to cut/paste than to copy since it's not actually moving the data.
|
Ask your Facebook Friends
|
Gnome, KDE, Fluxbox, IceWM, XFce, etc. etc. These are desktop environments/window managers that have been around a long time.
I'd love to know about some of the 'cutting edge' desktop environments/window managers out there. Ones that maybe make use of...
Started by Sembiance on
, 7 posts
by 7 people.
Answer Snippets (Read the full thread at stackoverflow):
I just watched.
Update/retraction: Ok, I take it back.
Seriously.
Although is another cutting-edge desktop.
KDE 4 has a pretty cutting edge interface, with a new look and desktop widgets.
Released.
|
|
I wrote a Java program to download HTML page. But CPU usage is near to 100%, while network utilization is lower than 3%. It seems like that CPU became my bottleneck. So is there any suggestions about cutting my CPU usage.
Answer Snippets (Read the full thread at stackoverflow):
Downloading the web pages alone should not cause that much resource utilization though, you may want to look into a profiler to find out whats bottlenecking you... .
If you have a continuous while loop, give your program some sleep time between iterations .
|
|
What's the best way to keep an eye on the pulse of the programming industry and stay abreast of developments as we languish in jobs where we're often not on the cutting edge?
I tend to read resources such as stackoverflow and slashdot that often speak...
Started by jdk on
, 5 posts
by 5 people.
Answer Snippets (Read the full thread at stackoverflow):
Then you can also follow along with N-list sites.
Often have references to some of the cutting edge.
|
|
95 GTI keeps cutting out at low revs approaching junctions. Have changed crankcase breather hose (£58 from VAG!) as had hole in but all other hoses are as should be. obviously indicates a problem of lost vacuum/leak on inlet side but cannot find any source...
Started by flange on
, 9 posts
by 8 people.
Answer Snippets (Read the full thread at com):
Had a hole in the pipe that goes airbox....
Finally got enough time off of work to look at it .
Had this problem for a few weeks on my 95 8v .
I havent had this myself as such but there has been some posts on here before about this problem, try reading this .
|
|
Cutting aluminum ok i made a cutting tool for empty beer cans
But well it's just for fun
Started by weeba2kv on
, 22 posts
by 9 people.
Answer Snippets (Read the full thread at laserpointerforums):
Re: Cutting aluminum I'm guessing you are running 45mW Re: Cutting aluminum Under full shortcicruit it's giving 1.6 volt 600 - 700 amp maybe even more and yes it's running on 230 volt Re:....
Re: Cutting aluminum Yo, you be crazy mon.
|
|
What have been your observations in the substantive differences, in general, between cutting in the 1-25 year-old group as opposed to the 25-and-up group?
Started by No One on
, 8 posts
by 6 people.
Answer Snippets (Read the full thread at enotalone):
That marginalizes the behavior and ignores the fact that once you start doing it the cutting you're surrounded by the idea....
It takes the place it for attention.
The fact that once you start doing it the cutting becomes extremely addictive.
|
|
Mga cockmates share nyo po d2 ang breeds na nagpapakita ng exceptional cutting nd gameness(common discussion cutting or gameness)
Started by dreamstar2 on
, 30 posts
by 14 people.
Answer Snippets (Read the full thread at sabong):
|
