|
Posted 27 November 2011 - 20:05
cum pot sa instalez SATA RAID Driver?..am inteles ca trebuie copiat pe o discheta dar nu am nici floppy disk si nici discheta
Started by S.Srk on
, 16 posts
by 5 people.
Answer Snippets (Read the full thread at linkmania):
Insert the ASRock Support CD into your optical drive, pentru ca hdd'ul sa functioneze, am nevoie ca acel sata raid driver sa fie instalat Posted 04 nevoie ca acel sata raid ....
Make a SATA / SATAII driver diskette.
|
|
Well, I've searched now for several days and played with every setting I can think of, but still can't coax better than average performance out of a recent install of RAID 0 using an Silicon Image 3132 based PCI-e (x1) Sata2 card (should have bought the...
Started by dlhendo on
, 8 posts
by 4 people.
Answer Snippets (Read the full thread at sevenforums):
Is off, etc), so I think it's just the card, the bus, the driver or some combination not worth figuring, power saving is off, etc), so I think it's just the card, the bus, the driver or some combination.
|
|
I'm coming to you now from a fresh install of Windows XP on an Intel ICH5R controller. I installed Windows without having to use a floppy disk and I would like to explain how I did this. I have looked all over the internet for months - across many different...
Started by raskren on
, 20 posts
by 7 people.
Answer Snippets (Read the full thread at msfn):
That process for any other SATA / RAID driver that poped into the office, so i looked for the generic! PLZ Pure Krome: Can you share the method you used for easily adding a RAID/SATA-Driver? I never has been known for ages....
|
Ask your Facebook Friends
|
I have a brand new OCZ Agility 3 on a fresh install of Windows Vista SP2 in AHCI mode and these are the speeds I get.
These speeds are kinda **** even for SATA II, my old secondary HDD gets close to these speeds. Is this normal?
Started by zebra 204 on
, 14 posts
by 5 people.
Answer Snippets (Read the full thread at rage3d):
Its currently in the G-SATA II ports.
The drive has been plugged into both.
That I believe say G-Sata and yellows ones which I've always considered to be the standard SATA II ports.
|
|
First of all, scuse my poor english...
I bought recently a SSD Force 3 60gb.
It´s working with a MOBO ASUS "M4N78 PRO" (Chipset Nvidia 720i/Geforce 8300) - see my system description.
This MOBO is Sata II capable, but my SSD only works on SATA I (1,5g)...
Started by collicchio on
, 11 posts
by 5 people.
Answer Snippets (Read the full thread at corsair):
My Cosair....
I am using the Microsoft driver (Standard AHCI 1.0 Serial ATA Controller).
I believe driver for this chipset since 2010 (April).
Lurking) but the SATA driver is still dated 09/04/2010 driver version 11.1.0.43.
|
|
Hey
I'm running Force GT 120 in Sata II mode and quite confused about read/write speeds. Especially read/write on smaller packets is quite bad i think. I have FW 1.2, running AHCI/Raid, TRIM is on and done many suggested optimizing steps.
Tested with ...
Started by Minnus80 on
, 10 posts
by 4 people.
Answer Snippets (Read the full thread at corsair):
(1-3) and (5-6 board has the AMD SB....
AS i suspected something most new drivers installed
- Changed new sata cable
- tested 2 different sata ports.
Here is my Force 3 60 GB SATA II performance Thx kyle0r for fast reply.
|
|
Google didn't help much
Is there one specific add-on card that is better than the other? I'm not concerned about raid since the RocketRaid 2640 that I have now sucks as it is, and it's slow. I'm moving away from using them as raid and just using add-on...
Started by freaksavior on
, 11 posts
by 3 people.
Answer Snippets (Read the full thread at techpowerup):
One drive is dead essentially....
No input? One of the biggest things to consider (beside driver support) is the bandwidth that uses a Sil3132 chip http://www.siliconimage.com/products/product.aspx?id=32
It has 2 SATA 3.0 Gbps 2tb hooked to the mobo.
|
|
In another post that i can not find it was suggested that i update my sata drivers for my motherboard in order for the game to run and show servers using my raptor drive, not sure why this was suggested
but when trying to install it i get this error messge...
Started by wickid on
, 5 posts
by 3 people.
Answer Snippets (Read the full thread at americasarmy):
With the game and servers showing
now when i plug in my Western Digital 150 GB VelociRaptor SATA 3 in a server ip
it was suggested that i update my sata drives
firewall disabled and stop from starting up as well as defender u can go ahead....
|
|
After replacing the 7200rpm drive with the 180gb ForceGT from Corsair, I have updated to the latest firmware (1.3.3), BIOS (A08), did a fresh install of Win7 after erasing the disk with Partition magic, got Drivers from dell's website, etc. I didn't see...
Started by Magikarp on
, 9 posts
by 4 people.
Answer Snippets (Read the full thread at corsair):
With the A05 bios, it won't boot half the timeSure it has SATA III ports and that it's plugged into one of them? -Run an ATTO benchmark
-Tried the Generic Chipset drivers....
Bugs is to force the hardware to sata II? Nice nice...
|
|
Hello everyone!
I have a strange situation with two cards.
LAN: "Intel Pro/1000 PT DUAL PORT" (chipset is Intel 82571EB)
and
SATA RAID controller: "3ware Inc 9650SE SATA-II RAID PCIe"
By "lspci" command these cards are founded by ESXi 5.0 successfully...
Started by aslyotov on
, 10 posts
by 3 people.
Answer Snippets (Read the full thread at vm-help):
Can you please check the VMKernel.log ....
Driver.map.d # grep 9650SE ../pci.ids
1004 9650SE SATA-II RAID PCIe
However, there is no driver mapped boot, but it looks like the initialization of the driver fails for some reason.
|
