|
Posted 27 November 2011 - 20:05
cum pot sa instalez SATA RAID Driver?..am inteles ca trebuie copiat pe o discheta dar nu am nici floppy disk si nici discheta
Started by S.Srk on
, 16 posts
by 5 people.
Answer Snippets (Read the full thread at linkmania):
Insert the ASRock Support CD into your optical drive, pentru ca hdd'ul sa functioneze, am nevoie ca acel sata raid driver sa fie instalat Posted 04 nevoie ca acel sata raid ....
Make a SATA / SATAII driver diskette.
|
|
I have a brand new OCZ Agility 3 on a fresh install of Windows Vista SP2 in AHCI mode and these are the speeds I get.
These speeds are kinda **** even for SATA II, my old secondary HDD gets close to these speeds. Is this normal?
Started by zebra 204 on
, 18 posts
by 8 people.
Answer Snippets (Read the full thread at rage3d):
Its currently in the G-SATA II ports.
The drive has been plugged into both.
That I believe say G-Sata and yellows ones which I've always considered to be the standard SATA II ports.
|
|
Hi everybody,
i'm trying to find a SATA Controller that has a PCI-E connecction of at least 4x, and has also at least 4 channels for SATA disks. I need it to make a real raid 5 system, the fakeraid on my motherboard is absolutely crap.
Started by Stefano on
, 8 posts
by 8 people.
Answer Snippets (Read the full thread at superuser):
The data sheet is here and here's a pic of the card:
I used/products/images_new/AMCC_9650SEe_kit.jpg
3ware 9650SE-4LPML PCI Express Lanes: 4 SATA II Controller Card up there with ....
Is the 8 port version of the SATA II card.
|
Ask your Facebook Friends
|
I have recently purchased a laptop to do some offsite development, as well some of my own work during commuting.
I am used to developing on XP, but the laptop was bundled with a version of Vista Home Premium (I had no say in this unfortunately). I tried...
Started by johnc on
, 12 posts
by 12 people.
Answer Snippets (Read the full thread at stackoverflow):
Thing of it was Vista II, IIS 7 has some different than XP.
I've been working on XP and Vista in parallel practically since Vista Vista with the annoying things removed.
Reworked the driver strategy.
|
|
On Mon, 15 Dec 2008 20:32:32 +0100, "Orion" <nieuwsgroepenlezer@quicknet.nl
Ik heb vandaag op 1 pc 1 maal XP , 1 maal vista 64 bit, en 1 maal Vista 32
bit ge-installeerd in 3 primaire partities.
Dat ging echter moeizaam wat betreft de vista's en...
Started by Orion on
, 4 posts
by 2 people.
Answer Snippets (Read the full thread at omgili):
En ook in de oude Vista stond de waarde 4 en die draaide ook goed,
maar toen stond ahci zover....
Ik heb 2 SATA II drives, dus ik neem aan dat die NCQ ondersteunen ? Zal dat
nog eens
zonnetje.
Qo8h0Fdq2n9U6@mid.individual.net...
|
|
Hey guys,
Ill try and keep this straight and to the point but at this point myself, intel, and dell are baffled. I have a Dell XPS730 with the Nvidia Nforce 790i chipset. I run two 500 gig SATA drives under RAID 0. I recently installed an Intel X25 80...
Started by 03stage2 on
, 10 posts
by 6 people.
Answer Snippets (Read the full thread at sevenforums):
Either....
Motherboard SATA no.
You will see a Marvell SCSI controller in the device manager too .
Either the SATA II or SATA III controllers can sustain that WD drive at full rate supports a SCSI driver .
Probability no.
|
|
Hi all
I have an issue with the Vista boot screen being shown when my pc boots up even though it's running Windows 7 Home Premium 64bit. It all started after I intalled an update for Windows. I have tried multiple things to fix it including doing a fresh...
Started by hutchpe on
, 14 posts
by 6 people.
Answer Snippets (Read the full thread at atomicmpc):
- Download but don't
- Unisntall the drives using Start ==> Control Panel ==> Uninstall programs
- Run driver sweeper 2012, 02:12 PM might also be worth....
Try doing this:
- Download and install driver sweeper (a quick Google away).
|
|
From the raw measurements you are reporting, I strongly suspect that
your X58 chipset has assigned a PCIe x1 Gen1 lane to your Highpoint 620:
Newegg.com - HighPoint Rocket 620 PCI-Express 2.0 x1 SATA III (6.0Gb/s) Controller Card
PCIe Gen1...
Started by MRFS on
, 9 posts
by 4 people.
Answer Snippets (Read the full thread at thessdreview):
Will have no relevance to the max performance of the Marvell sata chip since it has INTERNAL x1 lane
i received my vertex 3 today ( installed on my x38 -dq6 with SATA 2 ports) and have worse write speeds than chipset and sata ports....
|
|
@ all users with a NVIDIA nForce RAID or AHCI system:
Important information for all users, who are here for the first time
This thread has got a big volume with a lot of sites and hundreds of replies. There is no reason to waste time and to read them....
Started by Fernando 1 on
, 20 posts
by 9 people.
Answer Snippets (Read the full thread at msfn):
Are you using the newest driver to test it?
nForce4 AMD Edition (6.66) - Windows XP Professional driver to test it?
nForce4 AMD Edition (6.66) - Windows XP Professional x64
Version: 6.66
Release Date with the NF3 nvraid drivers either....
|
|
Ghost XP SP3 Auto Driver version II (NGUYENPHU) Sau thời gian ra bản Ghost phiên bản I, được anh em tin tưởng. Hôm nay mình làm tiếp phiên bản II. Trong phiên bản này mình đã lấy lại hết những thành phần đã lượt bỏ trong phiên bản I như (Hyper Terminal...
Started by nguyenphu on
, 15 posts
by 1 people.
Answer Snippets (Read the full thread at vn-zoom):
Có 260 thành viên cảm ơn nguyenphu cho bài viết này: 02091994 (14-04-2011), 20101997 (03-01-2012), 2610011092 (12-12-2011), abc1246 (22-11-2011), andymouse (08-04-2011), angelalonevnn (17-05-2011), angel_nato (18-06-2011), anhducdt (16-09-2011), anhkhoa... .
|
