|
Hi guys,
Just a quick one to say that thanks to a recommendation from lostswede that I now have SATA 6GB/s working on my X58A-UD3R board in OSX Loin !!!!
I'm running a OCZ Vertex3 which should run at up to 500 GB/s. On the Intel SATA II ports on the X...
Started by notshy on
, 20 posts
by 12 people.
Answer Snippets (Read the full thread at insanelymac):
Speed
3) eject the drive by dragging to trash
4) disconnect the sata data cable to the drive and wait 5 seconds
5) reconnect the sata cable to the drive
Questions:
1) does the drive remount?
2) if yes the sata data cable to the drive....
|
|
I picked up a barebones PC kit the other day so that I could get a speed boost and still use my old hard drives/DVD drives, etc.
I currently have two IDE drives and unfortunately the new motherboard only has 1 IDE head to plug into (and I fear I have ...
Started by Dillie-O on
, 3 posts
by 3 people.
Answer Snippets (Read the full thread at superuser):
Definitely external USB enclosure for the....
At the current prices, you can get SATA disks cheaper than ATA ones.
Being that the motherboard offers a SATA controller, you will gain a performance boost if you buy a SATA disk for it.
|
|
I want to repace my sata 200 hdd into an sata 300 ssd OCZ Vertex Plus SATA II 2.5" SSD 120GB prijzen | Core | Tweakers.net Pricewatch
this is the ssd i want to buy but my question is if i : does a sata-200 work with sata-300
i want do do this in the asus...
Started by dylanwerre on
, 5 posts
by 4 people.
Answer Snippets (Read the full thread at sevenforums):
There are Sata 2 and Sata 3 ports on the mobo....
There is no Sata 200 or Sata 300.
The advantage you get when you buy a Sata III SSDI fail to understand your point.
No reason to stand on your head for a Sata3 port.
|
Ask your Facebook Friends
|
I'm sold on SATA SSDs for my next PC but since their prices grow un-proportionally to their size, I'm wondering what would be the best configuration for them (for OS and Programs) would be:
2 SSDs using: on-board RAID0 dedicated RAID controller for RAID...
Started by travis on
, 4 posts
by 4 people.
Answer Snippets (Read the full thread at superuser):
Bonus of reducing head movements by spreading tasks between spindles, so you will probably get with the performance drop due to all the head movements if source and destination files are on the same drive.
|
|
Is there a USB Enclosure for internal SATA 3.5 hdd that can be used to copy data or is there any other way to do that?
This is a Seagate Barracuda 1TB 7.2K SATA HDD.
Thanks.
Started by Mel9484 on
, 14 posts
by 6 people.
Answer Snippets (Read the full thread at spiceworks):
This should let me connect....
Looks like it works for both SATA and IDE, which would be good.
Thermaltake_BlacX_ST0005U_External_Hard_Drive_SATA-_-17-153-071-_-Product http:/ / www.tigerdirect.com to it :) @DialJC - Have you tried this one.
|
|
I had a SATA port go out yesterday. I was sure it was one of those new 1tb drives on the RAID system. I had one port to spare so, if it does it again, I have to start removing things or think about getting another board.
Has anyone had the experience ...
Started by plant1here2 on
, 23 posts
by 6 people.
Answer Snippets (Read the full thread at ebay):
Maybe even worse than I suspected, and it may show it's head again it at their download site.
Some of the cheap SATA cables don't seem to have connectors which connect and all, there is a serious problem.
Replacing the cable fixed it.
|
|
Title pretty much says it all, looking for a few cheap sata laptop harddrives. Alternatively, I could trade my 300gb velociraptor for a few of them.
Heat under max347, bumps will be returned. Thanks!
Started by Mr34727 on
, 13 posts
by 6 people.
Answer Snippets (Read the full thread at hardforum):
|
|
OK, never thought one would have to research about plugging in a HDD to a sata port but I've learnt my lesson
So, basically, the intel sata3 6G port on the mobo damaged my samsung F3 HDD. Plugged it in, turned it on, pc started to make loud clicking sounds...
Started by Buddy on
, 17 posts
by 10 people.
Answer Snippets (Read the full thread at anandtech):
Replace in a HDD to a sata port but ....
Bad drive is the culprit, probably head crash on start up or something.
No way the SATA port damaged your drive ...
Nothing but 0's and 1's ...
The work, based on data sent through the port . .
|
|
After browsing boards and google on how to use Ghost 2003 with SATA drives I realized you have to have the .793 build. If you have the .775 or .778 etc builds you HAVE to upgrade in order to be able to use SATA drives with the -FNI switch.
Most everyone...
Answer Snippets (Read the full thread at radified):
For a test run on my old system I followed some, at least until I tried... .
While I have been a user of Ghost since the 90's I make no boast of my prowess) the necessity of having build .793 for sata drives.
It will have a sata hard drive.
|
|
Hi Guys,
EDIT: Also looking for a cheap mobo which has ACC (unleashing) functionality to unlock AMD cpu's. I believe this is available on boards with southbridge SB710 and higher.
I'm looking for a motherboard which has SATA 3, USB 3 and HDMI output would...
Started by markie76 on
, 26 posts
by 6 people.
Answer Snippets (Read the full thread at avforums):
) - SATA 6Gb/s - SATA RAID - HD Audio (8-channel) - Gigabit Ethernet - ATX: Amazon.co.uk: Computers & Accessories
(This motherboard is USB3.0 & can actually deal with up to Sata 6GB/s)
Intel i5-750 Quad - Socket 1156 - PCI-E 2.0 (....
|
