|
Hi all-
My wife decides that she wants to paint the living room, so she wants the ceiling painted, so we start looking at it it and there seems to be “sooty” marks near the walls in the living room on the opposite wall from the stove in the dining room...
Answer Snippets (Read the full thread at hearth):
When the exterior....
When a wood this shadow effect.
I believe this condition is often referred to as ghosting .
Remember the stove is a forced hot air heating system and it will suck in, run through the heat to see if that helps.
Of both.
|
|
Tool marks
I got an Eskabar for helping Moose out at the Spirit O steel show in Knoxville and the hoofed one also gave me a BK2 for me birthday.I have had them for5 mos. now and decided it was time to make them the color I like and thats just bare steel...
Started by willis on
, 17 posts
by 14 people.
Answer Snippets (Read the full thread at bladeforums):
If I did strip it though, I'd leave....
Willis, I think we met you.
I left the tool marks on my 7 and 9.
My BK9 not sanded some yet, just stripped.
My BK11 and BK7 I ended up taking to a mirror polish .
To knock down some of the grind marks.
|
|
I'm thinking about stripping the polyurethane finish off of my p bass. Using chemicals and sanding are not an option.
After stripping the body, I would like to leave it natural. Would the heat gun leave burn marks? And how much (if any) sanding would ...
Started by FArfel on
, 20 posts
by 13 people.
Answer Snippets (Read the full thread at talkbass):
With (google) search terms like 'removing guitar finish.' No, a heat gun won't burn the wood if you use use polyurethane or shellac to finish the bare wood.
|
Ask your Facebook Friends
|
I don't know what they are - but they won't come off when I try to get them off.
I've tried murphy oil.
Thanks in advance.
Blessings, Gloria
Started by qualitygal on
, 21 posts
by 16 people.
Answer Snippets (Read the full thread at qvc):
Could it be from a hot cup of coffee? The mark from the heat of the pizza box, however, take it to ....
Got that dreaded heat mark from a pizza box (even though it was on a trivet!) NOTHING worked....so was good when I did it.
|
|
What is the best way to clean up some Yugo wood, and what the heck color is it suppossed to be? I have a steamer I use on clothing to take out wrinkles so I am going to use that to steam some of the dents, but what is the best method to get this wood ...
Started by Speedracer211 on
, 35 posts
by 15 people.
Answer Snippets (Read the full thread at akfiles):
Then rinse thoroughly....
Bleach seems to help to get the wood to be more or less of uniform color 30 minutes...
The hot water, but I like it like that.
Scrubbing raises the fibers in wood , so not tooo hard.
Did a couple coats of oil.
Great.
|
|
I built an open-cabinet/shelves out of Tasmanian Oak about a year ago in year 11 woodwork. I've decided to finally finish it off, the joints aren't exactly visually appealing and I want to use a wood filler to fill in the gaps and re-edge bits and pieces...
Started by GIJoel on
, 11 posts
by 6 people.
Answer Snippets (Read the full thread at woodworkforums):
Sorry if I've offended you with poor craftsmanship that allowed? Selleys Plastic wood gives a reasonable result and will take stain OK,it comes in several to use the cabinet for clothes, shoes and....
To remove the glue, lines and saw marks.
|
|
How do you all bring out the luster in your wood handles?
I'm having some difficulty getting my wood handles to look the way I want. I think I've made something like 20 knives so far, and have made good progress from my first one. But I can't get the...
Started by crimsonfalcon07 on
, 20 posts
by 13 people.
Answer Snippets (Read the full thread at bladeforums):
Right??? Thanks for the buffing I can get that kind of look from lacquer... .
Everything should be smooth and even and ALL file or machine marks need to be removed before moving Luster to my wood?? There's got to be a joke in there somewhere.
|
|
I've thought about removing the wood for ages but could never make up my mind on what I wanted and did not want to spend out for new trim if I was not 100% sure.
I got a sample of matt black wrap and glass black wrap to wrap my trim and see what I thought...
Started by scott b5 on
, 41 posts
by 18 people.
Answer Snippets (Read the full thread at audi-sport):
I cant decide what i like....
Originally Posted by scott b5 I've thought about removing the wood for ages but could never make up my mind on what I wanted wood.
That my thinking and gloss is keeping in with gloss the original wood.
|
|
I never heard of this particular kind of wood before yesterday?? Pretty cool stuff. Do any of you have any experience with it?
Just for giggles, (and because its a 1911) check out these custom grips out of purpleheart.
http://zombiehunters.org/forum/viewtopic...
Started by 38chevyrodder on
, 17 posts
by 15 people.
Answer Snippets (Read the full thread at gunbroker):
Made a bunch of wood working friends happy, have 2 if you don't pre-drill any nail holes, etc.....
If you want to work some of it have a sharpener close at hand that is some real tough wood linear feet of just-over-dimension 2x4 purpleheart.
|
|
By Anthony McCartney, The Associated Press
LOS ANGELES, Calif. - Homicide detectives have re-opened their investigation of Natalie Wood's death nearly 30 years after the actress drowned in the waters off Southern California in one of Hollywood's most ...
Started by minx on
, 20 posts
by 9 people.
Answer Snippets (Read the full thread at soapchat):
CBS might be inflating Natalie Wood in the Searchers....
I agree that I do not think there was some nefarious plot to kill her .
There was a cruel joke going around afterwards:
What's the only kind of wood that does not float?
Natalie Wood.
|
