|
What's a normal housing arrangement to expect? And is it better to get housing or to ask for housing allowance? I've heard that if you ask for allowance, key money becomes an issue. How much should you receive for key money? I've heard that 5M for key...
Started by braindrops on
, 15 posts
by 8 people.
Answer Snippets (Read the full thread at eslcafe):
No Key Money.
I'd say the standard contract is:
Housing allowance = 500,000 / month.
|
|
So, like I've said in other posts, the WW did not cure my compressor surge/stall when towing. I have been contemplating and researching every option, from changing to the ported compressor housing to regearing to increase the RPMs. I am convinced that...
Started by Robert6401 on
, 9 posts
by 6 people.
Answer Snippets (Read the full thread at ford-trucks):
The reduced ....
I ran the ported compr housing (eliminated surge in my case) then added the 1.0 exh housing.
In addition to the WW you already installed, I feel you would benefit from the combination .
I'd go with the 1.0 exh housing.
|
|
Here is the link on approved Mega Housing Projects and Mega Housing Projects (Under process) in entire Punjab (including GMADA).
PUDA - Mega housing projects
You can verify which project is approved and which one is under process/consideration, the other...
Started by Rickyy on
, 5 posts
by 4 people.
Answer Snippets (Read the full thread at indianrealestateforum):
GMADA to make info available on website
Our Correspondent Mohali, february 1
Following complaints from the public regarding difficulties in obtaining details of property, including financial aspects, the... .
Its a very useful source of information.
Thanks.
|
Ask your Facebook Friends
|
Narrowest housing. in a Tri-five w/stock framerails
Springs will be inboarded and was curious what the narrowest housing that anyone has used and what size wheel...???
Started by DHR racecars on
, 14 posts
by 6 people.
Answer Snippets (Read the full thread at yellowbullet):
Housing....
In a Tri-five w/stock framerails My springs are moved inboard .
Re: narrowest housing.
In a Tri-five w/stock framerails Darren, the one in my pops 55 is 51 3/8 from inside to inside of the flanges.. .
Re: narrowest housing.
|
|
84 Stringer 800 swivil bearing housing Resealed the lower unit last summer but still getting water in gear oil. Put new seals in Swivil housing too. Question on the swivil housing seals are they supposed to keep water from getting down to the main vert...
Started by doral1985 on
, 13 posts
by 3 people.
Answer Snippets (Read the full thread at iboats):
The vertical....
Re: 84 Stringer 800 swivil bearing housing yes ~ Allan
Be careful in what you wish for....You might bearing housing No, lake water is actually supplied to the pump between the vertical driveshaft and the swivel housing.
|
|
Would it be ok to tap a nipple fitting in to the charge pipe instead of the comp housing the reason i ask is because my comp housing doesnt have a nipple on it??
Started by febreze101 on
, 15 posts
by 7 people.
Answer Snippets (Read the full thread at srtforums):
The issue was that at the compressor it see's boost, but due to pressure drop in to the charge pipe instead... .
Of that being done to i guess guys say its a better point of boost then at the comp housing but i wasnt from the Compressor housing.
|
|
EEOC is invesitgating several Sexual Harrassment claims from former employees of City Housing Authority.
Consul for the Housing Authority has confirmed that the claims are against the Housing Authority as well as Director, Carla Mancha.
Started by kinlnews on
, 15 posts
by 15 people.
Answer Snippets (Read the full thread at topix):
LOL!! it is about time someone took action against.
Consul for the Housing Authority has confirmed that the claims are against the Housing Authority as well as Director, Carla Mancha.
Housing Authority.
|
|
A body housing for sale.. housing only with two sets of spring perches on it.
Price $280 plus shipping
Location: Newport News, VA 23608
Started by USCG CHARGER on
, 17 posts
by 9 people.
Answer Snippets (Read the full thread at forabodiesonly):
I've no idea if the 8.25 carrier work with this eight and three-quarter housing 8.25.
Mount locations.
|
|
Remove Thermostat Housing I replaced my thermostat but when i was reinstating the bottom bolt on the housing broke. I have been trying to remove this piece but it doesnt seam to want to come out. On the housing i removed the bolt and the two nuts what...
Started by BulkierZero on
, 12 posts
by 5 people.
Answer Snippets (Read the full thread at supraforums):
Originally Posted by DegreE_v.2.0 Precious.
Could not find spec on housing, but don't over tighten thermo - stat housing bolts....7-15lbs, THERMOSTAT HOUSING, AND A GOD DAMN WORKING CUP HOLDER.
|
|
This idea seems to be gathering momentum...
'QE for housing':
http://www.insidehou...ng/6520368.blog
Quote: What if quantitative easing could be used to invest in new homes rather than buy financial assets?
Instead of government bonds, the Bank could ...
Started by CrashConnoisseur on
, 4 posts
by 4 people.
Answer Snippets (Read the full thread at housepricecrash):
RufflesTheGuineaPig, on 10 February 2012.
Rit, on 09 February 2012 and Ireland after having purchased all their spare housing.
'QE for housing':
http://www.insidehou...ng/6520368.blog
My 3,000th post.
|
