|
I'm just trying to get my realist and shiny new dpa 4099 to work together. got myself a headway edb-1 to blend them together with. on closer inspection i find that it will supply phantom power to both realist and dpa at once, but you can't have phantom...
Started by dave manington on
, 15 posts
by 8 people.
Answer Snippets (Read the full thread at talkbass):
It's called 'phantom' power as it only supplies power to....
It's called 'phantom' power as it only supplies power to those things that need it.
No, you won't damage it.
|
|
Hey all,
I am having a problem recording using phantom power with the Zoom R24 and a Behringer B2 condenser mic. I plug the mic in to any one of the XLR jacks that is supposed to have phantom power, but even with the gain up full-blast, I can barely hear...
Started by mr.zoomer on
, 14 posts
by 7 people.
Answer Snippets (Read the full thread at 2090):
|
|
Hi guys,
I have a brand new Sound Devices USBPre 2 and I plan to use it on my next recital recordings....
I can switch on and off phantom powering through very little dip switch on the rear with a slender tool, but what if I leave phantom power always...
Started by achabloop5080 on
, 14 posts
by 13 people.
Answer Snippets (Read the full thread at gearslutz):
My first choice for operation would be to leave....
Turning on the phantom power when the USBpre2 is already powered up ON, and phantom power ON, I wouldn't worry about it.
With the phantom power turned on vs.
|
Ask your Facebook Friends
|
I find myself in need of 2 channels of phantom power. I am torn with getting either the ART Phantom II or a nicer unit like the Stewart Audio PM-4.
I'm worried mostly because I plan on using these with a pair of Earthworks SR-77s. They are adamant about...
Started by Corran on
, 26 posts
by 11 people.
Answer Snippets (Read the full thread at gearslutz):
Beware most outboard phantom power supplies have poor quality electrolytics caps to block on phantom power....
When I needed two channels of external phantom power, I bought an apex app22 it was rather cheap sells them.
|
|
I have a problem with a light.
The power feed goes to a junction box above the light. A cable runs from there to the switch. The power runs to the switch on the black wire. The white wire comes back from the switch and feeds power to the light. With the...
Started by eddwads on
, 15 posts
by 8 people.
Answer Snippets (Read the full thread at diychatroom):
Using a digital volt-meter? They have such low impedance you're probably just reading phantom voltage -black - one), At the fixture end I have the black one wire-nutted to the power source and the white from the power, there is nearly....
|
|
I'm fairly intermediate with electronics, but feel confident to be able to build circuits from a schematic.
I want to build an onboard preamp for my acoustic guitar, whose electronics have died. The electronics on it have a piezzo pickup and microphone...
Started by jabeavers on
, 7 posts
by 3 people.
Answer Snippets (Read the full thread at diyaudio):
If someone could is a precision, low power FET input op amp that can operate from a single supply of 5 V to 36 V, or dual about your phantom source supply....
I can use it with single supply power and not need to create a virtual ground.
|
|
Hey all,
I've got an M-audio fast track pro interface which provides 48V phantom power. I have been recording in mono with an AKG C414 mic which requires 48V Phantom Power, but I would like to purchase a CAD E70 mic and record in stereo. My issue is this...
Started by glpbqb on
, 6 posts
by 4 people.
Answer Snippets (Read the full thread at gearslutz):
I have been recording in mono with an AKG C414 mic which requires 48V Phantom Power, but I would like phantom power....
|
|
I have a Nady spc-25 condenser which for now will have to work until I can save for a new one. I also happen to love it for the price I got it for.
It runs on a couple batteries and doesn't need phantom power. I also will be using another mic that does...
Started by temporaryalias on
, 7 posts
by 6 people.
Answer Snippets (Read the full thread at acousticguitarforum):
HOWEVER, my mixer when phantom power line level?
Thanks....
I also will be using another mic that does need phantom power.
It runs on a couple batteries and doesn't need phantom power.
It for the price I got it for.
|
|
Phantom Power Supply or Mixer? Hi all, recently I purchased a behringer b1 condenser mic which requires phantom power, so now I'm wondering will it work if I use a phantom power supply such as behringer mic100 or ART Phantom , so connect mic to the phantom...
Started by thehitman123 on
, 6 posts
by 2 people.
Answer Snippets (Read the full thread at homerecording):
No, and no!
Get an audio interface with phantom power, like the M Audio Fast Track Pro, Tascam US.
|
|
I know this is a crazy idea usually, with all of the external phantom supplies out there.
I just picked up an old studio master 16 to 4 board and no phantom. Lots of empty spaces in the chassis.
I also have an old fostex 450 crap board and it has this...
Started by bensrokosz on
, 5 posts
by 5 people.
Answer Snippets (Read the full thread at diyaudio):
Use 12 volts for the phantom supply and then all you need to do is add the two resistors to each input.
|
